Search found 39 matches
- Sun Dec 11, 2022 10:26 am
- Forum: Technical
- Topic: New copper radiator versus original radiator with new harness.
- Replies: 4
- Views: 911
New copper radiator versus original radiator with new harness.
Hi everybody, I mounted an adaptable aluminum radiator 8 years ago on my S1 4.2 cabriolet, and it has always leaked slightly. I had it repaired and it still leaks a little. In the end, I don't want to hear about aluminum radiators anymore. Indeed, they are difficult to repair and often of poor quali...
Re: car lift
Hello, to answer your questions, if the Autolift3000 is compatible with my E-type OTS, it is compatible with a 2 + 2. In addition, the two trays are 80 cm long, so the weight of the car is distributed over 160 cm. Thus, there is no risk of damaging the structure of the car, provided you press in the...
- Thu Jan 28, 2021 1:58 pm
- Forum: Welcome!
- Topic: A lover of the E-type Jaguar in France
- Replies: 7
- Views: 3210
Re: A lover of the E-type Jaguar in France
For fun, I am also enclosing the photo of my Peugeot 504 V6 convertible, today, in all its forms ...
Best Regards.
Jacques
Best Regards.
Jacques
- Thu Jan 28, 2021 1:54 pm
- Forum: Welcome!
- Topic: A lover of the E-type Jaguar in France
- Replies: 7
- Views: 3210
Re: A lover of the E-type Jaguar in France
And here is the result today.
- Thu Jan 28, 2021 1:51 pm
- Forum: Welcome!
- Topic: A lover of the E-type Jaguar in France
- Replies: 7
- Views: 3210
Re: A lover of the E-type Jaguar in France
Here are some pictures of the mechanics.
- Thu Jan 28, 2021 1:41 pm
- Forum: Welcome!
- Topic: A lover of the E-type Jaguar in France
- Replies: 7
- Views: 3210
A lover of the E-type Jaguar in France
Hello everybody, I just realized that it's been more than 8 years I am on this forum, and I never introduced myself ... It is never too late to do well! My name is Jacques, I am 51 years old and I am an electronics and computer engineer. A fan of fine mechanics since I was young, I fell in love with...
Re: car lift
Hello, I chose the Autolift3000 solution a month ago. The 2 trays slide and can adapt in width to the Jaguar E-type, by putting them to the minimum. To ensure maximum safety, I add 2 pieces of tube to block the trays at a minimum. This system allows the car to be mounted at 60 cm in the middle, so a...
- Mon Jan 25, 2021 12:49 pm
- Forum: Technical
- Topic: Belt tensioner bearings repair – Tutorial
- Replies: 2
- Views: 1584
Re: Belt tensioner bearings repair – Tutorial
The bottom photo shows the dismantling. Indeed, for the reassembly it is indeed necessary to push on the outer race of the bearings, in order not to damage them, in accordance with the photo.
I send you too the final picture.
Thank you Jerome for this remark.
I send you too the final picture.
Thank you Jerome for this remark.
- Mon Jan 25, 2021 11:40 am
- Forum: Technical
- Topic: Belt tensioner bearings repair – Tutorial
- Replies: 2
- Views: 1584
Belt tensioner bearings repair – Tutorial
Hello, Jaguar E-type spare parts do not offer a repair kit for the belt tensioner pulley. It is only proposed to buy back the complete pulley. I offer you a small tutorial which allows you to replace only the bearing part and thus refurbish your pulley: 1- Remove the tensioner pulley by unscrewing i...
- Mon Jan 25, 2021 11:37 am
- Forum: Technical
- Topic: Belt tensioner bearings repair – Tutorial
- Replies: 0
- Views: 1661
Belt tensioner bearings repair – Tutorial
Hello, Jaguar E-type spare parts do not offer a repair kit for the belt tensioner pulley. It is only proposed to buy back the complete pulley. I offer you a small tutorial which allows you to replace only the bearing part and thus refurbish your pulley: 1- Remove the tensioner pulley by unscrewing i...
- Mon Jan 25, 2021 11:28 am
- Forum: Series 2
- Topic: Timing cover removal with engine in car ?
- Replies: 6
- Views: 4048
Re: Timing cover removal with engine in car ?
Hello, for the removal of the "front timing cover", the workshop manual says that the cylinder head must be removed. Now, I offer you a method to do this without removing the cylinder head: 1- First of all, disassemble the oil sump. I just did a tutorial on this subject, on this forum. 2- Remove the...
- Mon Jan 25, 2021 11:22 am
- Forum: Technical
- Topic: Oil sump removal - E-type 6 cylinders.
- Replies: 0
- Views: 1879
Oil sump removal - E-type 6 cylinders.
Hello, I have just dismantled the oil sump from my type E S1 4.2, and this operation is not easy if the engine is in the car and is poorly explained in the Jaguar manual. For this, I offer you a tutorial that makes things easier. To start, you have to disassemble : 1- the sump drain plug to remove t...
- Mon Jan 25, 2021 11:12 am
- Forum: Technical
- Topic: Chain tensioner?
- Replies: 14
- Views: 5249
Re: Chain tensioner?
Hello, Following the disassembly of the oil sump of my E type (to deal with an oil leak), I was lucky enough to realize that the shoe of the lower chain tensioner had come off and had fallen to the bottom of the housing (see attached photos). I really came close to the engine failure ... This ROLON ...
- Mon Jan 25, 2021 10:56 am
- Forum: Technical
- Topic: Reaction plate removal
- Replies: 19
- Views: 7065
Re: Reaction plate removal
Hello, To dismantle the "reaction plate", I found an interesting video on youtube: https://www.youtube.com/watch?v=9mrVqrOLuQ4 But in the end, I followed the procedure in the B67 manual, which is a bit different, but requires making 2 bars : 10 inch length, 3/8 diameter, rounded end. But, after putt...
- Tue Aug 01, 2017 6:19 am
- Forum: Series 1
- Topic: Dimensions of boot floor boards - S1 roadster
- Replies: 5
- Views: 3660
Re: Dimensions of boot floor boards - S1 roadster
Hello Martin,
Thank you very much for this precise and valuable information.
Best Regards.
Jacques
Thank you very much for this precise and valuable information.
Best Regards.
Jacques
- Mon Jul 31, 2017 4:01 pm
- Forum: Series 1
- Topic: Dimensions of boot floor boards - S1 roadster
- Replies: 5
- Views: 3660
Dimensions of boot floor boards - S1 roadster
Hello, I am looking for the dimensions of the boot boards for a roadster S1 or S2, because I would like to reproduce the boards with composite wooden ... Can anybody please tell me dimensions A, B and C and confirm me that the original thickness is 10 mm ? Thanks in advance for yours answers. Jacque...
- Mon Apr 13, 2015 12:56 pm
- Forum: Technical
- Topic: Change the handbrake pads without removing the suspension ?
- Replies: 6
- Views: 4776
Hello, I tried the operation last weekend on one side only (3 hours work). I therefore confirm that it is possible to change the brake pads without removing the complete suspension but it is very painful. By cons, it is impossible to remove the hand brake pads without dismanting the handbrake system...
- Fri Apr 10, 2015 3:44 pm
- Forum: Technical
- Topic: Rear lights bulb holder / connector
- Replies: 1
- Views: 2113
Hello,
I think you can find it here
http://www.autoelectricsupplies.fr/product_list/81
by buying a buld holder.
Best
Jacques
I think you can find it here
http://www.autoelectricsupplies.fr/product_list/81
by buying a buld holder.
Best
Jacques
- Fri Apr 10, 2015 6:04 am
- Forum: Technical
- Topic: Change the handbrake pads without removing the suspension ?
- Replies: 6
- Views: 4776
- Thu Apr 09, 2015 4:03 pm
- Forum: Technical
- Topic: Change the handbrake pads without removing the suspension ?
- Replies: 6
- Views: 4776
Change the handbrake pads without removing the suspension ?
Hello, Has anyone ever been able to change the hand brake pads without removing the complete rear suspension. My S1 rear end was brand new (with Series 2 calipers), and I have a pad lining that has taken off the metal. I am wondering if it is possible to change it by dismantling piece by piece the c...