Search found 21 matches

by Desmo
Mon Jun 26, 2017 7:03 pm
Forum: Series 1
Topic: Front brake Piston/Cylinder from SNG Barratt ?
Replies: 3
Views: 427
Germany

Front brake Piston/Cylinder from SNG Barratt ?

Hello, I would like to fit the 8777SS front bare piston/cylinder units from SNG Barratt in stainless steel. Are there any experiences with them or also with the alternative 8777SS/1 and what do you think about the "original" quality part with number 8777#? Many thanky for your help. Best regards Desmo
by Desmo
Fri Feb 17, 2017 11:57 am
Forum: Series 1
Topic: Convertible Top refubrishing
Replies: 1
Views: 358
Germany

Convertible Top refubrishing

Hello,

the original hood has not been opened for many, many years. The car was dry stored inside. Over time the material has become relatively hard. There may be a risk of opening cracks. Is there a way to make the fabric supple again? Many thanks for your help.

Best regards
John
by Desmo
Sun Oct 30, 2016 7:06 pm
Forum: Series 1
Topic: Colour combination 1961 OTS
Replies: 5
Views: 763
Germany

Re: Colour combination 1961 OTS

Hallo,

Thank you for your information.

Best regards
Desmo
by Desmo
Thu Oct 27, 2016 4:10 pm
Forum: Series 1
Topic: Colour combination 1961 OTS
Replies: 5
Views: 763
Germany

Colour combination 1961 OTS

Hello, resently I have seen a Certificate of a 1961 OTS with recorded colour combination: Exterior Cream Interior Light Blue Soft Top Blue Was the color shade of the interior a really light blue one and was the carpet colour in this combination blue ? Many thanks for your information. Best regards D...
by Desmo
Fri Apr 01, 2016 10:39 am
Forum: Series 1
Topic: rear seat panel trimming ?
Replies: 9
Views: 1519
Germany

Hello Steve,

an early 1962 one.

Best regards
John
by Desmo
Fri Apr 01, 2016 10:37 am
Forum: Technical
Topic: Series I Heater case dismantling
Replies: 4
Views: 738
Germany

Hello,

Thank you. Yes ideed. This is an early Heater box unfortunately without screws etc.

Best regards
John
by Desmo
Thu Mar 31, 2016 8:11 pm
Forum: Technical
Topic: Series I Heater case dismantling
Replies: 4
Views: 738
Germany

Series I Heater case dismantling

Hello,

I have opened the Heater case unit for cleaning etc. How can I remove the internal metal air flap without to damage anything? Thank you very much for any help.

Best regards
John
by Desmo
Thu Mar 31, 2016 8:07 pm
Forum: Series 1
Topic: rear seat panel trimming ?
Replies: 9
Views: 1519
Germany

Hello Yves,

As you know my FHC is in still very original condition. On my car both sides are covered with the genuine black vinyl leathercloth material.

Best regards
John
by Desmo
Thu Jan 14, 2016 7:05 pm
Forum: Series 1
Topic: Lucas DMBZ6 Distributor Cap
Replies: 2
Views: 714
Germany

Thank you David, again.

Best regards
John
by Desmo
Wed Jan 13, 2016 5:51 pm
Forum: Series 1
Topic: Lucas DMBZ6 Distributor Cap
Replies: 2
Views: 714
Germany

Lucas DMBZ6 Distributor Cap

Hello,

What was the genuine article number for the Cap of the early Lucas DMBZ6 Distributor? Thank you for any help.

Best regards
John
by Desmo
Sun Jan 10, 2016 1:36 pm
Forum: Series 1
Topic: Question luggage panel S1 3.8 FHC
Replies: 3
Views: 1220
Germany

Question luggage panel S1 3.8 FHC

Hello, The back panel behind the seats - luggage panel which can be lowered to give an increased floor area; fitted with 3 chromed hinges on the foor - was perhaps recovered long time ago on my car. Exactly from this panel I want to know how the geunine/correct covering was on the 3 ends/lines - rig...
by Desmo
Thu Dec 31, 2015 2:49 pm
Forum: Technical
Topic: Fitting S1 FHC boot floor runners / Door panel backside
Replies: 0
Views: 781
Germany

Fitting S1 FHC boot floor runners / Door panel backside

Hello, I have a question how the runners were original fitted on the hardura material. Is a simply pop rivet correct? Was there a spacer between the chrome runner and the hardura mat and of what size was the washer on the other end - back side of hardura mat -? Many thanks for help. How was the fron...
by Desmo
Sun Dec 20, 2015 11:47 am
Forum: Series 1
Topic: S1 FHC black Hardura and Moquette material
Replies: 3
Views: 1144
Germany

S1 FHC black Hardura and Moquette material

Hello, I want to replace the two piece black luggage floor mat and the further hardura interiror units and would be gratefull for some recommendations about suppliers, with the most original material as possible. Also for the genuine black moquette material for the boot area and the backside of the ...
by Desmo
Tue Nov 24, 2015 9:04 pm
Forum: Technical
Topic: Oil Filter help required
Replies: 9
Views: 1825
Germany

Hello,

Are the 3.8 and 4.2 oil cleaner aluminium heads not interchangeable?
Thanks for help.

John
by Desmo
Fri Oct 16, 2015 8:44 pm
Forum: Series 1
Topic: Radiator cowl
Replies: 0
Views: 683
Germany

Radiator cowl

Hello,

I am looking for a 3.8 radiator cowl. Where is the difference between the 3.8 and the 4.2 item? Thank you for any hint.

Best regards
John
by Desmo
Sun Aug 02, 2015 12:23 pm
Forum: Technical
Topic: Fiting seal handbrake lever aperture
Replies: 2
Views: 599
Germany

Hello Jonathan,

Thank you very much for your reply. I will have a look on the steel box assembly. It is a 1962 Coupe.

Best regards
John
by Desmo
Sat Aug 01, 2015 5:48 pm
Forum: Technical
Topic: Fiting seal handbrake lever aperture
Replies: 2
Views: 599
Germany

Fiting seal handbrake lever aperture

Hello,

This rubber seal is unfortunately missing so I need a tip where this seal is originally fitted? Is it glued directly on the inside surface ot the center console aluminium panel or perhaps on the wooden reinforcement there? Thank you for any help.

Best regards
John
by Desmo
Sun Apr 05, 2015 5:41 pm
Forum: Technical
Topic: Cylinderhead bearing caps
Replies: 1
Views: 464
Germany

Cylinderhead bearing caps

Hello,

If the original camshaft bearing caps are missing, is it possible to replace them with other used items? Are such spare items available and could be there a problem with alignment? Thank you very much for any information.

Best regards
by Desmo
Sun Dec 07, 2014 12:22 pm
Forum: Welcome!
Topic: Buying an early 1961 OTS?
Replies: 9
Views: 2836
Germany

Hello Mystery Type, I understand your point of view. Hello David, Yes. The car is registeted there with the right numbers but without further information. Are there other special "points" on the a genuine 1961 body I can check? What should be the right number for the genuine differential? Thank you....
by Desmo
Sun Dec 07, 2014 11:08 am
Forum: Welcome!
Topic: Buying an early 1961 OTS?
Replies: 9
Views: 2836
Germany

Hello, Thank you for your reply. Christopher. The old documents from the USA are still with the car, the Jaguar Certificate confirms the, chassis No, the engine No and the body No. The engine No. incl. the head No. are right. Also the body No. tag is still stamped oin the bonnet stiffener inside. Th...