Search found 12 matches
- Wed Nov 04, 2020 4:13 pm
- Forum: Series 1
- Topic: S1 2+2 wiring loom and footwell
- Replies: 8
- Views: 2682
Re: S1 2+2 wiring loom and footwell
Recently finished mine with no problems in this area. I used a piece of metal conduit underneath the card cover shown in Trevors picture. Make sure the large P clip is in place in the footwell where the loom passes through into the engine bay. Its a bit of a bugger to fit. Has the installer correctl...
- Mon Jul 27, 2020 8:27 am
- Forum: Series 1
- Topic: Front Bumper - whats going on
- Replies: 4
- Views: 1996
Re: Front Bumper - whats going on
Yes, they are definitly front ones. The annoying part is that they were b both re chromed before I noticed this problem
- Sun Jul 26, 2020 6:15 pm
- Forum: Series 1
- Topic: Front Bumper - whats going on
- Replies: 4
- Views: 1996
Front Bumper - whats going on
Started to reassemble the front bumpers on my '67 series 1. Bought the car disassembled with overiders detached. Trial fitted the bumpers before paint but not the overiders. Can't make out whats going on now the overiders are attached. https://i.postimg.cc/J0Psycf9/IMG-4236.jpg On the rear of the RH...
- Sat Jul 18, 2020 5:27 pm
- Forum: General
- Topic: Windscreen Installation
- Replies: 5
- Views: 2103
Re: Windscreen Installation
Same for me
- Tue Jul 07, 2020 6:35 pm
- Forum: General
- Topic: Windscreen Installation
- Replies: 5
- Views: 2103
Windscreen Installation
I'd managed to install the rear window in my '67 2+2 Series 1 restoration but decided the front windscreen was a job for a pro - especially have shelled out over £450 on a new windscreen. Living in Mid Wales I was expecting a real hassle getting someone out here. My google search turned up a nationa...
- Wed Dec 11, 2019 8:25 pm
- Forum: General
- Topic: Master craftsman still out there
- Replies: 4
- Views: 2227
Master craftsman still out there
If you you're thinking of having your cam covers polished read on. I had my 4.2 engine completely rebuilt by a very well known firm and the work included polishing the cam covers. The engine sat for over 12 months in its shrink wrap until the time to set things up for installation approached this mo...
- Wed Nov 13, 2019 5:23 pm
- Forum: Series 1
- Topic: Series 1 2+2 Headlining Question
- Replies: 3
- Views: 1974
Re: Series 1 2+2 Headlining Question
Got it. Thanks Peter. Looks like these parts are out of production anyway so I'll try without.
- Mon Nov 11, 2019 7:26 pm
- Forum: Series 1
- Topic: Series 1 2+2 Headlining Question
- Replies: 3
- Views: 1974
Series 1 2+2 Headlining Question
Interior refit kit arrives in the next few days and I'm looking at tackling the headlining on my Series 1 2+2. Bought the car fully disassembled and looking at the parts inventory I find I'm missing BD29352 and BD29353 rear right and left headliner grippers which I will have to purchase. I'm in the ...
- Sat Aug 31, 2019 3:04 pm
- Forum: Series 1
- Topic: Accelerator Stop plateGetting ready to install
- Replies: 3
- Views: 3494
Re: Accelerator Stop plateGetting ready to install
Thanks guys. I'll try some 2mm plate as soon as the body is back from paint.
- Thu Aug 29, 2019 6:57 pm
- Forum: Series 1
- Topic: Accelerator Stop plateGetting ready to install
- Replies: 3
- Views: 3494
Accelerator Stop plateGetting ready to install
Getting ready to begin reassembly of my Series 1 2+2. Checking the accelerator controls I realise I'm missing the accelerator stop plate C20639. Not sure of the function of this piece or if it goes above or below the bulkhead. I'd prefer to make one rather than pay £28 for a replacement. Could someo...
- Mon May 20, 2019 8:45 am
- Forum: Technical
- Topic: Clutch master cylinder replacement
- Replies: 2
- Views: 1554
Re: Clutch master cylinder replacement
Thanks Julian. I'll contact the supplier and suggest they check their stock
- Sun May 19, 2019 1:43 pm
- Forum: Technical
- Topic: Clutch master cylinder replacement
- Replies: 2
- Views: 1554
Clutch master cylinder replacement
I'm rebuilding my 1967 late Series 1 2+2. The pedal box and rear brakes are all Series 2 and it was fitted with the longer hydrostatic slave cylinder. All seem to be original - maybe part of the changeover to Series 1.5/2 cars?? The clutch master cylinder attached to the pedal box is a cast iron Gir...