The 'E' Type Forum

That spring is #31 on this diagram https://www.sngbarratt.com/English(US)/#/us/FindParts/Families/XKE%20~2F%20E-Type/3/E-Type%20S3%20Roadster/13/HEATING%20&%20AIR%20CONDITIONING/16230/assembly/18222 Available from SNG Barratt: https://www.sngbarratt.com/English(US)/#/US/parts/2928954b-db9e-4a01-9768...

In your initial post, you said:
" I don't seem to be able to get them from the usual sources."

And yet:

https://www.sngbarratt.com/English(US)/ ... 60c7493%60

The original posting referenced in post #2 by Steve was mine. I made two errors (I fat-fingered a couple of numbers while using the numeric keypad on my laptop). Here is my correction that I posted about 6 entries below my original: QUOTE The average thickness of the 5 spacers = 0.2818 (between 9/19...

@michelejag

I think I replied to your personal message
I am not sure; not very familiar with this boards PM system -- Did you receive it?

Holger Thanks for the kind words and continued interest in my effort. Back in October I ran into two major issues that necessitated a tactical pause: 1) I was nearly 100% through my budget but only 85-90% of the way through my restoration. Needed to slow down the spending and get caught up financial...

Ooops - one more item You're gonna find that the heater box is heavy. You'll need this bracket to help support the weight(both parts of the bracket are available at SNG Barratt) https://i.postimg.cc/pVBKQQFR/20240219-120631.jpg https://i.postimg.cc/JzvgQCkw/20210429-141618.jpg / https://i.postimg.cc...

Gordon You need to understand one more "hole". That additional hole is at 9 o'clock to the rectangular opening for the heater and i's larger than the 4x holes for the mounting bolts for the heater box. This hole is for the two cables that attach to the heater box - one controls the flap (to open/clo...

mgcjag wrote: ↑

Wed Aug 02, 2023 5:10 pm

Hi Craig..yes correct..pletry of info here on the forum if you search sump plug...
Steve

Redman wrote: ↑

Thu Aug 03, 2023 2:33 pm

I had been searching oil drain plug not sump plug

Provided you know the precise terms on which to search.
It took seconds for me to post a direct response to the OP's original question

Could someone kindly confirm size?

Sump Plug, 5/8"-18 UNF
https://www.sngbarratt.com/English(US)/ ... 20DRAIN%60

The reference I used to post my reply is Jaguar V-12 E-Type: A Guide to Authenticity by Richard T Russ I will likely provide more info than you asked for - trying to anticipate follow up questions Oil lines for oil pressure gauge and banjo bolts (C32445) - Bright Cadmium Throttle pedestal - cast alu...

Durango What I believe you are talking about is hydrogen embrittlement. I don't know the science behind it but the items need to be heated to several 100 degrees for several hours. I believe William Angel can best describe / explain the requirements /impacts -- but I don't know if he regularly frequ...

I'm coming to this party a little late an my references are based in the States, but I had my front suspension components cadmium plated. I used Warner Propeller and Governor out of Tucson AZ. The aircraft industry has high standards for plating (of any type) and Brooke enjoys supporting the hot rod...

They are an unusual screw/bolt available at Barratt's
They are very pound of them

I doubt you'd find a local substitute locally

https://www.sngbarratt.com/English(US)/ ... Down=false

A Series III was just sold at a Mecum's Auction for $175,000
It has 7,465 original miles
You can see the photos from the auction site here:
https://www.mecum.com/lots/FL0123-53790 ... -roadster/

Check out photo #5

Paddy Any luck in finding the replacement part(s)? I decided to replace my door handles in toto.I sent them out to be chromed and the shop dismantled the plunger mechanisms on both. I was unsuccessful in correctly reassembling them; I believe all bits and parts are there. If you think these would he...

I was looking for something else and stumbled on another decal. This one is rarely seen cuz it is on the heater fan motor which is attached to the bottom of the heater matrix -- see photo. If you look at my first photo (with the array of decals I have collected), this one is not in the mix. It is to...

I am in the midst of a total restoration of my Series III and have a ton of photos. I attached a few here that may be helpful. Any others (evaporator on my bench, underside of dash, A/C lines, etc) as requested https://i.postimg.cc/QCyL6W7N/20220315-145020.jpg https://i.postimg.cc/cCjj7Gqr/20210713-...

"but not so many that show you where to put them"

Keep searching the 'net or find a friend with Dr Russ' book

Got have some good replies already. I am restoring my SIII OTS and have collected some photos off the web First Photo is of the decals I picked up to be applied at the every end of the process Other photos were collected to help locate their positioning. Hope this helps . . . https://i.postimg.cc/zv...

Paddy

Is this the part you are looking for?

https://www.terrysjag.com/product/9601.html

I know (believe?) SNG Barratt carries them too (I ordered from them back in summer) -- but I couldn't find them on their web-site.

9601 RH Door Lock Housing
9602 LH Door Lock Housing