Search found 8 matches
- Sun Sep 08, 2019 8:17 pm
- Forum: Technical
- Topic: SU Mixture adjustment
- Replies: 6
- Views: 3604
Re: SU Mixture adjustment
Thank you for your reply’s , plugs 1 and 6 are fine, plugs 3and4 are mildly sooty , car is going will try and fine tune middle carb . Thank you Keith
- Thu Sep 05, 2019 8:54 pm
- Forum: Technical
- Topic: SU Mixture adjustment
- Replies: 6
- Views: 3604
Re: SU Mixture adjustment
Thank you , will concentrate on the middle carby
- Thu Sep 05, 2019 6:28 pm
- Forum: Technical
- Topic: SU Mixture adjustment
- Replies: 6
- Views: 3604
SU Mixture adjustment
1965 series 1 4.2 When tuning my SU carbs, to get a satisfactory mixture,I end up with .065 ,055 and .047 jet depths. Should I leave them as they are , or average them out.
Thanks Keith
Thanks Keith
- Thu Jul 11, 2019 6:56 pm
- Forum: Series 1
- Topic: slave master cylinder
- Replies: 5
- Views: 3600
Re: slave master cylinder
When I try to adjust the free travel between rod and slave I have the following problem, with 1.6mm setup there is little resistance in the clutch pedal the first time it is depressed and bites low to the floor . Next time I press the pedal it is fine. If I adjust the free travel without the spring ...
- Wed Jul 10, 2019 9:07 pm
- Forum: Series 1
- Topic: slave master cylinder
- Replies: 5
- Views: 3600
Re: slave master cylinder
Hi Steve , thanks for the reply , I have tried what you have suggested and the result was the same . I then pressure bled the system , guess I could have another go . I have also replaced aLl seals on both cylinders . Keith
- Wed Jul 10, 2019 6:37 pm
- Forum: Series 1
- Topic: slave master cylinder
- Replies: 5
- Views: 3600
slave master cylinder
Clutch Problem 1965 etype . I have pressure bled the clutch hydraulics and have this problem . If I leave the slave cylinder (non hydrostatic ) return spring off the clutch feels fine , if I add the spring I have to pump it once to feel normal , feels like there is air in the system. If I increase t...
- Fri May 03, 2019 11:03 am
- Forum: Series 1
- Topic: New stock fluted front side/indicator lenses
- Replies: 40
- Views: 18979
Re: New stock fluted front side/indicator lenses
How do I send a PM to MarekH
- Fri Apr 19, 2019 6:40 pm
- Forum: Series 1
- Topic: New stock fluted front side/indicator lenses
- Replies: 40
- Views: 18979
Re: New stock fluted front side/indicator lenses
Etype front fluted lenses, how do I order , Thank you