Thanks Mich,
Yes that’s a help & punching holes makes sense for the fastening.
Regards,
Glenn
Search found 34 matches
- Sat Dec 23, 2023 5:12 am
- Forum: Series 1
- Topic: Stoneguard - felt, rubber ??
- Replies: 2
- Views: 1105
- Wed Dec 06, 2023 10:40 pm
- Forum: Series 1
- Topic: Stoneguard - felt, rubber ??
- Replies: 2
- Views: 1105
Stoneguard - felt, rubber ??
Hi all, just a quick one to ask whether something should be attached to the LHS stoneguard ? Should there be a strip of felt or rubber, noting it is quite close to the exhaust pipe. Any suggestions would be appreciated. Thanks, Glenn https://i.postimg.cc/MHgShmK8/Stoneguard2.jpg https://i.postimg.cc...
- Fri Oct 15, 2021 9:17 pm
- Forum: Series 1
- Topic: FHC Rear Door Hinges
- Replies: 6
- Views: 1817
Re: FHC Rear Door Hinges
Thanks Steve,
Will get to work,
Glenn
Will get to work,
Glenn
- Fri Oct 15, 2021 9:01 am
- Forum: Series 1
- Topic: FHC Rear Door Hinges
- Replies: 6
- Views: 1817
FHC Rear Door Hinges
Hello forum, Just a quick question…..for my ‘64 3.8 FHC. Are the 2 hinges for the rear door identical ? - mine are not (one slightly narrower than the other) I think the part number is BD20261 ( I don’t have a parts book), so I think they should be the same. A quick confirmation will help me greatly...
- Mon Jun 07, 2021 10:11 am
- Forum: Series 1
- Topic: Window Channel Felt FHC
- Replies: 2
- Views: 1119
Re: Window Channel Felt FHC
Thanks Jonathan,
I just got a response from the supplier.
Side “A” goes to the outside.
Cheers,
Glenn
I just got a response from the supplier.
Side “A” goes to the outside.
Cheers,
Glenn
- Sat Jun 05, 2021 10:35 am
- Forum: Series 1
- Topic: Window Channel Felt FHC
- Replies: 2
- Views: 1119
Window Channel Felt FHC
Hello all, Just a quick one - I have a 3.8 FHC. The channel felt is new for the door from one of the UK “usuals”. It is for the glass to slide inside (front, rear and top). I’ve searched and cannot find anything to tell me whether side “A” or “B” should be to the outside. I’ve had a look at my moder...
- Sat Nov 07, 2020 2:13 am
- Forum: Series 1
- Topic: Front bumper Motif Bar Extension Assembly distance piece
- Replies: 5
- Views: 1907
- Wed Sep 23, 2020 10:54 am
- Forum: Technical
- Topic: Am I overheating?
- Replies: 68
- Views: 13978
Re: Am I overheating?
Paul, Here’s some suggestions from my mechanic : I would ask a few questions . 1 . Thermostat orientation - is it in the correct way? 2. Does heater work ? 3.if car was in my shop I would remover thermostat then replace the housing and fill cooling system .remove water pump belt .then start the engi...
- Fri Jul 03, 2020 1:44 pm
- Forum: Technical
- Topic: S1 3.8 bonnet mouth shape and dimensions (factory)
- Replies: 15
- Views: 5829
Re: S1 3.8 bonnet mouth shape and dimensions (factory)
Paul,
Thank you so much for the photos and lengths. We will put those measurements to good use this weekend and see what we come up with.
Glenn
Thank you so much for the photos and lengths. We will put those measurements to good use this weekend and see what we come up with.
Glenn
- Thu Jul 02, 2020 2:08 am
- Forum: Technical
- Topic: S1 3.8 bonnet mouth shape and dimensions (factory)
- Replies: 15
- Views: 5829
Re: S1 3.8 bonnet mouth shape and dimensions (factory)
Hello all, I am in a similar position to Mark (FHC1964) was last year. We are now working on my bonnet and would love to have the mouth looking right (with the understanding that there are different "rights"). So if anyone has any mouth dimensions at all that they can share with me, then we would ap...
- Wed Jun 10, 2020 12:33 am
- Forum: Series 1
- Topic: 3.8 FHC - RHD
- Replies: 10
- Views: 3345
- Fri May 08, 2020 9:48 pm
- Forum: Series 1
- Topic: 3.8 FHC Door Detail
- Replies: 11
- Views: 3622
Re: 3.8 FHC Door Detail
Thank you to everyone for your prompt supply of photos.
We will now work on those Doors this weekend.
Glenn.
We will now work on those Doors this weekend.
Glenn.
- Fri May 08, 2020 1:23 pm
- Forum: Series 1
- Topic: 3.8 FHC Door Detail
- Replies: 11
- Views: 3622
Re: 3.8 FHC Door Detail
Great, thank you George.
Happy to take any more in case there are slight differences with other cars.
Glenn
Happy to take any more in case there are slight differences with other cars.
Glenn
- Fri May 08, 2020 10:47 am
- Forum: Series 1
- Topic: 3.8 FHC Door Detail
- Replies: 11
- Views: 3622
3.8 FHC Door Detail
Hello forum, Would someone somewhere in lock-down world be able to post a photo or two of a finished car (3.8 FHC) showing the same part of the door as is being pointed out in this photo (where the window frame enters the door). I live 3 hours from Melbourne and am not allowed to travel to look at o...
- Thu Mar 26, 2020 2:16 am
- Forum: Series 1
- Topic: Wipers - RHD bench test video
- Replies: 6
- Views: 2545
Re: Wipers - RHD bench test video
Sorry Joe,
Just measured the two arms & mine are identical. I’ll come back your comment if I have trouble on installation with the travel of the wipers. Thanks again for the tip.
Glenn
Just measured the two arms & mine are identical. I’ll come back your comment if I have trouble on installation with the travel of the wipers. Thanks again for the tip.
Glenn
- Wed Mar 25, 2020 12:18 pm
- Forum: Series 1
- Topic: Wipers - RHD bench test video
- Replies: 6
- Views: 2545
Re: Wipers - RHD bench test video
Thanks Joe, There’s no conversion here - my car is original RHD Australian delivered. We were careful when we dismantled it to label the arms (assuming they were correct). Thanks for the heads up. I won’t assume everything is spot on when we re-install it. It was just nice to see it operate after do...
- Wed Mar 25, 2020 9:27 am
- Forum: Series 1
- Topic: Wipers - RHD bench test video
- Replies: 6
- Views: 2545
Wipers - RHD bench test video
Hello all, For your viewing pleasure.... I apologise if someone has already posted this but I couldn't find one if the past week of searching. While avoiding the big wide world, I wanted to make sure my wipers would work when I am ready to put them back in the car. I am posting this video to help an...
- Thu Jan 30, 2020 2:29 am
- Forum: Series 1
- Topic: Fuel and Brake Lines
- Replies: 7
- Views: 3479
Re: Fuel and Brake Lines
Thanks to everyone for their help. I will endeavour to run both down the RHS.
Glenn
Glenn
- Tue Jan 14, 2020 1:36 am
- Forum: Series 1
- Topic: Fuel and Brake Lines
- Replies: 7
- Views: 3479
Fuel and Brake Lines
Hello all, I have given up looking to find the correct location of the brake and fuel lines underneath the car, and how they are connected to the chassis. C10268 or just C10406# ? I cannot trust what we pulled apart is correct and would greatly appreciate help/direction/photos to run these lines cor...
- Sat Dec 21, 2019 10:27 pm
- Forum: Series 1
- Topic: Firewall “cut-out”
- Replies: 5
- Views: 2254
Re: Firewall “cut-out”
Thank you both Christopher and Mike. We will use your information to keep the project moving - just what we needed. And thank you, Christopher, for the tip about it not being a “mount”. We will take your advice and refer to the manual and fit it correctly. Australia is a great place to restore a Jag...