Hi Neil
One of the earlier posts was a reference to my questions from a couple of months ago when I was planning to fit an O/D box - it's all in now and working so feel free to message and ask anything - happy to help.
Cheers
Simon
Search found 13 matches
- Thu Aug 13, 2020 8:47 pm
- Forum: Series 3
- Topic: Overdrive S3
- Replies: 26
- Views: 7441
- Thu Jul 09, 2020 3:28 pm
- Forum: Technical
- Topic: Building an Engine Test Bed
- Replies: 18
- Views: 5304
Re: Building an Engine Test Bed
Hello there
Looks neat and you're welding looks good!
It's not easy to see on the photo but the rear mount at the back of the gearbox is rubber too, like the front?
Just thinking they all need to be either solid or flexible, but not a mixture.
Simon
Looks neat and you're welding looks good!
It's not easy to see on the photo but the rear mount at the back of the gearbox is rubber too, like the front?
Just thinking they all need to be either solid or flexible, but not a mixture.
Simon
- Fri May 22, 2020 7:16 pm
- Forum: Series 3
- Topic: Gearbox removal with engine in situ
- Replies: 23
- Views: 13713
Re: Gearbox removal with engine in situ
Hello there I took out an auto box and fitted a 4 speed OD box a few weeks ago without removing the engine or undoing the picture frame. Car was up on a 2 post ramp though. Auto box came out easily. To re-fit the manual box undid the engine mounts though and barred the engine forward as far as possi...
- Sat May 02, 2020 8:18 am
- Forum: Series 2
- Topic: Torsion bars
- Replies: 16
- Views: 4406
Re: Torsion bars
Hi good morning Going back you your original point that the handling was horrendous, can you be more specific about the problem? If you have a load of worn out joints in the wishbones, dampers and ARB you'll have so much compliance that's got to be resolved before you make "upgrade" changes. A small...
- Wed Apr 01, 2020 7:22 pm
- Forum: Technical
- Topic: Clutch master cylinder spacer
- Replies: 7
- Views: 3013
Re: Clutch master cylinder spacer
Hi Stuart Thanks I appreciate that. I'll try it at 11.4mm and see where that puts the clutch pedal - I can always make another slightly different thickness if need be but I have a starting point. When I get my master cylinder I can check those other dimensions and draw it up... Again, thanks for the...
- Tue Mar 31, 2020 7:15 am
- Forum: Technical
- Topic: Clutch master cylinder spacer
- Replies: 7
- Views: 3013
Re: Clutch master cylinder spacer
That's great, much appreciated!
No rush as I've got plenty to do...
Simon
No rush as I've got plenty to do...
Simon
- Mon Mar 30, 2020 6:13 pm
- Forum: Technical
- Topic: Clutch master cylinder spacer
- Replies: 7
- Views: 3013
Clutch master cylinder spacer
Hello there I'm after a bit of help please π I'm converting my series 3 to manual and I see in various parts drawings that there's a spacer fitted between the clutch master cylinder and the pedal box. I've had a shop around and see the usual places are on back order and I found one on eBay (photo at...
- Mon Mar 30, 2020 12:22 pm
- Forum: General
- Topic: SNGB Web Feedback
- Replies: 18
- Views: 5224
Re: SNGB Web Feedback
Hi Julian
That will be good when you do and I think it's really doable as you have the relationships between car - section - part already mapped so going part - section - car should be easy for a genius
In the meantime I'll phone up and prey I get someone dressed
Thanks and stay safe
That will be good when you do and I think it's really doable as you have the relationships between car - section - part already mapped so going part - section - car should be easy for a genius
In the meantime I'll phone up and prey I get someone dressed
Thanks and stay safe
- Sun Mar 29, 2020 9:07 pm
- Forum: General
- Topic: SNGB Web Feedback
- Replies: 18
- Views: 5224
Re: SNGB Web Feedback
Hello there, I've got a suggestion for some functionality that would have really helped me in the last week or so on your site... If you don't know exactly which section the bit you want is illustrated you have the facility to do a search. I've found that although I can find a list of sometimes mult...
- Sat Mar 28, 2020 8:42 pm
- Forum: Series 3
- Topic: Fitting a 4 spd box with OD into an auto V12
- Replies: 6
- Views: 2441
Re: Fitting a 4 spd box with OD into an auto V12
Hi Ole Thanks for your very helpful list - I've got some of those items covered off ok, some I kicked a little way down the road as a problem for future Simon and the rest I'm getting on with! I've had the box and OD serviced and have assembled all the bits to physically fit it but I'm still short o...
- Sun Mar 22, 2020 10:21 am
- Forum: Series 3
- Topic: Fitting a 4 spd box with OD into an auto V12
- Replies: 6
- Views: 2441
Re: Fitting a 4 spd box with OD into an auto V12
Hi Marek
Thanks very much - will do...
I hadn't really considered the wiring side of it much till now but literally just bought a new 4th switch as that one looks past it's best.
Best wishes and stay safe
Simon
Thanks very much - will do...
I hadn't really considered the wiring side of it much till now but literally just bought a new 4th switch as that one looks past it's best.
Best wishes and stay safe
Simon
- Sat Mar 21, 2020 8:18 pm
- Forum: Series 3
- Topic: Fitting a 4 spd box with OD into an auto V12
- Replies: 6
- Views: 2441
Re: Fitting a 4 spd box with OD into an auto V12
Hi Steve, Thanks so much - just had a quick skim through your link and it looks like everything I need... Probably going to tackle it next weekend (at least get the auto box out) Btw forum looks good so far! I'll keep an eye out and contribute in my niche if anything relevant comes up! Take care and...
- Sat Mar 21, 2020 6:20 pm
- Forum: Series 3
- Topic: Fitting a 4 spd box with OD into an auto V12
- Replies: 6
- Views: 2441
Fitting a 4 spd box with OD into an auto V12
Hello there I hope you're all keeping well... I'd appreciate any advice from anyone who has swapped the auto box for the jaguar 4speed with overdrive, please. I've tried to read up on previous posts so I hope I don't ask old or daft questions :) I'm pretty much ready to do the swap ( got the box and...