The 'E' Type Forum

The original was a cylindrical resistor type which was held on by 2 pop rivets. I can photograph my original if you like .

Regards,
Greg

See
#1 Paint Codes
Unread post by Heuer » Fri Nov 23, 2018 5:33 am

Hi Danny,
I have sent pics. via private mail but I am not sure they went through. Taached are the pics.

Regards,
Greg

Hi Richard,
I think I have an original cover but will have to find it in all my parts. From memory it is not in good shape so I will be interested in purchasing one from you when production ramps up.

Regards,
Greg

Looks very similar to the system used in the Austin Healey 3000.

Regards,
Greg

This switch looks the same as c15270 switch which was fitted to all Mark 2 saloons fitted with the dg gearbox.

Hi Phil,
Please find attached a pic. of my original rhd roadster firewall. I can send you other pics. if you want any further info.

Regards,
Greg

There are 16x BD20013/4 ( available sngbarratt) on each side of spring eyes and 2 x bd20013/1 and 2 x bd20013/2 (available sngbarratt) brass washers on the shouldered bolts . They do a "bonnet balance link washer kit (bd20013k) which has 4 washers .

Greg

SNG Barratt have them for 3.01 pounds (BD20013k).

Regards,
Greg

A person I got to know in the 90's who actually worked at Brown's lane as an upholsterer told me Jaguar never wasted anything. He said the cut off dates were not strictly adhered to. They would keep using the older part until is was totally gone . The date reflected the change date in theory but not...

Simon,
Sorry for the confusion in my previous post but the parts book lists 22 clips and 22 snapsacks . 11 of each per door although I have found on a couple of occasions Jaguar did not follow the parts book details.

Regards,
Greg

The parts book lists 22 clips and nylon snapsacks - 11 per door

Regards,
Greg

Always on the RHS.

Attached image from Chris Vine's excellent website of his restoration of a Series 2 roadster. I have found this an invaluable resource in my roadster restoration. Well done Chris !!!!!!

Regards,
Greg

I have another question. The exhaust heatshield is listed in the parts book as C28201 and is listed as having a bracket b285582 which attaches to the lower frame. It lists this bracket as having ufs125/6r set screw attaching the bracket to the heat shield. My question is - does this bracket also hol...

This oil filter housing is from a series2 fitted to later cars from eng. nos 7r2298 (swb) and 7e35583 (2+2) . There are ones available on Ebay but they are expensive.
Greg

What series E type does this fit ? I have a series 2 and I can't see it fitting this model.
Regards,
Greg

7/8" Hose clips were original on the Mark 2's previous to the straight port models. It may be worth checking with the Mark 2 people for a source . Jagara Spares in Sydney would be a good start.

I thought all the Series 2's bonnet struts were on the LHS of the bonnet ??

One of the original Bathurst cars came to Tamworth a few years after the race. The body panels were acid dipped and were so thin that they were only held together by the paint ! The car was sold but I don't know where it ended up.

Greg