The 'E' Type Forum

Hi all
I ve got a second hand part but i dont know the brand/type of connector which has to used here

Salut Miralf,

welcome to the forum!
Happy to see another Frenh here.
Beaucoup d'info et de conseil à trouver pour ta future E!
Tu es de quelle région ?
Je suis en Bretagne.
Cordialement
Michel

Hi, I've placed back the first door on the body after painting. Happy with the gap at the front :bouncyyellow: : https://i.postimg.cc/pTDP6W4w/20190622-153221.jpg https://i.postimg.cc/d0YH9JRk/20190622-153228.jpg But on the seal side, I'm wondering if it is normal to get the door so open and very ha...

Not easy to do on the car but possible if you lift a bit the engine.
I ve fixed mine on the engine in place in the engine bay that way.

Philip, I ve got information on the differences between low an high z on the injectors. I ve also found literature on the P&H management to be used to drive low z. If i need to add P&H bords or change the 12 injectors....Damn I should have choose a Citroen 2cv to not have this kind of issues or a mo...

Happy to see that the topic drains so many reaction and information. As James said, the K6 is already purchased. Even so I still have 3 ways to go ahead: 1)I’ve got the K6. I’ve been in touch with Leoni, and yes, I should get data from her with a map and help. I add about this ECU that 2 of the last...

I suggest you get the car running with original ECU. DO NOT UNDERESTIMATE the complexity of tuning an engine. If you have not done so before, don't even try. Take it to someone who knows how to do it. Philip, I do not underestiate the job at all. I've read lot of data with the Megasquirt experience...

Hi there Finally after thinking and get an oportunity, I ve purchased a K6 Emerald ECU to get a fresher solution to manage both injection and ignition. It will replace the 2 ECUs from the donnor XJS I ve got with the v12. Because I get it from a guy on Ebay, It comes with a Lotus map.... A few work ...

Hi,
I m going to replace the wood rim on my drive wheel.
Can you let me know with glue and coating hqve you used ?
Best regards
Michel

Thank you both for your return. I will continue to think to what sounds to be the best solution for me. I've seen on the last S3 V12 restaured by E Type UK that the ECU they use is placed under the sit. A third way to be concidered. For the fuel, I've planed to use the same kind of solution Philip d...

Thank you Philip, I hesitate between the 2 solutions. The place exists in the Boot as I'm going to use an immerge fuel pump. But harness from the XJS is large and I m afraid to get it visible all along of the body panel. Further more, I ll have to add large wires because the battery in the XJS is al...

Hi there, I'm choosen to use an XJS EFI engine with the Jaguar ECU used on the donor car. My question is : where is the best place to fit the ECU? Do I have to cut all the wiring loom to get tthe ECU at the front , or is it better to keep all as it is and place the ECU in the boot ? Thank you for yo...

The getrag 5th has a 0.81 ratio.

Thank you Philip, A very interesting result I schould share when I will finish my own s3. I do use a 2.88, a getrag 5 speed and 205 x 70 x 15 tires. The speedo I have is a 6332/05 which is reputed to be used with a 3.07 diff. Dont know what all this will bring on the speed measure..... A picture fro...

Hi there

I've a MPH speedo on my car. It comes from a S3 US 2+2 car.
I've the oportunity to get an original one with a km/h face.
What can be\has to be the price for a such speedo ?
As I'll have to sell the MPH one, I've the sme question.
thank you for your advise.

Regards

Hi Bill
I found 90cm on my car.
What kind of problem do you have.
Michel

I ve had issue with my bonnet. Everything was fine until i place the it on the car. I've discover lately that the bonnet support I've painted was bent  . The bonnet cannot be fix in the good way. The distance between the left hinge to the center of the car must be 43 cm. Ive messured 45cm...and by t...

Hi Mike
Welcome to the forum.
What do you mean by "french delivery". Did the car came from France ?

Hi James
welcome to the forum.

Where are you from ?

Hi Elliot
welcome to the forum.