Search found 1259 matches
- Wed Dec 26, 2012 7:21 pm
- Forum: Technical
- Topic: Rear hub endfloat / spacers
- Replies: 4
- Views: 3159
I had an idea on the Autobahn today whilst driving (boring empty at 180 km/h for 3 hours): What if I am wrong and my gauge means 8 mm instead of 0.8 mm ? It indicates 80 on the scale, but IIRC it was pretty loose still. Would this make sense ? 8-6.73 = 1.27 remaining... in the "wrong" direction. ???...
- Mon Dec 24, 2012 11:01 pm
- Forum: Technical
- Topic: Rear hub endfloat / spacers
- Replies: 4
- Views: 3159
Hi Chris, yes I think this is it. I will get there in a few days once X-Mas + family is "over" and I can crawl to the shed again :-). I thought that the 100 NM torque would pull it home but maybe it does not so a HAMMER is needed :-) (I love my 2 kilo hammer) Naaaa, I am gonna be careful, but I?ll g...
- Mon Dec 24, 2012 12:56 pm
- Forum: Technical
- Topic: Rear hub endfloat / spacers
- Replies: 4
- Views: 3159
Rear hub endfloat / spacers
Hi all, I finally managed to free the slotted outer drive shafts (I abrased the too- thick zinc with a smooth wire wheel !), so that I finally could try to determine the endfloat. I went the way the small youtube film shows- clamp the shaft by the yoke, lever the hub with a screwdriver, have a dial ...
- Sun Nov 25, 2012 8:13 pm
- Forum: General
- Topic: Futuristic E-Type on Sky premiere
- Replies: 3
- Views: 7871
- Mon Oct 15, 2012 3:08 pm
- Forum: Technical
- Topic: Shock-absorber and spring change-over
- Replies: 21
- Views: 10812
- Sat Oct 13, 2012 7:44 pm
- Forum: Technical
- Topic: Shock-absorber and spring change-over
- Replies: 21
- Views: 10812
I went the brake disc route, and I can say I used ordinary M10 threaded material (1 mtre 6 Euros). Problem is that on one of the bolts (I simply cut the 1 mtre in 2 halves) I had the nut to loose it?s thread 2 times :roll: So, I am not sure if I should recommend this. I would do it again, as the sec...
- Tue Oct 09, 2012 5:55 pm
- Forum: Series 1
- Topic: Polite request.
- Replies: 9
- Views: 6484
- Tue Oct 09, 2012 5:53 pm
- Forum: Series 1
- Topic: Need: Rear shock absorber rubbers
- Replies: 1
- Views: 2108
Need: Rear shock absorber rubbers
All, I neeed to replace the rubber "eyes" on my rear shocks. They are the original type, and the rubbers are hard and show ruptures. This is due to the long time the car sat. The shocks have no rust on the chrome pushrod, and feel ok to a professional I asked. So I want to re-use them (at least for ...
- Wed Aug 08, 2012 6:54 pm
- Forum: Welcome!
- Topic: New Guy from Germany, 2+2 Project Owner
- Replies: 7
- Views: 4953
- Mon Sep 12, 2011 10:30 pm
- Forum: Technical
- Topic: Where can I get the white plastic ring / indicator switch ?
- Replies: 3
- Views: 3382
- Sat Sep 10, 2011 6:18 pm
- Forum: Technical
- Topic: Where can I get the white plastic ring / indicator switch ?
- Replies: 3
- Views: 3382
Where can I get the white plastic ring / indicator switch ?
Hi, I found this thread shows what is sooo broken in little pieces in my car: The white plastic ring inside the indicator switch: http://www.etypeuk.com/forum/viewtopic.php?p=10462&sid=3d883b1a704bcd9c2b728a785659a43c Now, where can I get this item, and which part number does it have ? I can't find ...
- Wed Jun 01, 2011 10:45 pm
- Forum: Welcome!
- Topic: a couple of words
- Replies: 2
- Views: 2997
- Thu Mar 24, 2011 8:28 pm
- Forum: General
- Topic: New E Type Book for the 50th
- Replies: 67
- Views: 32864
- Wed Mar 23, 2011 10:12 pm
- Forum: Technical
- Topic: S1 2+2 door window frame too high ???
- Replies: 1
- Views: 1990
S1 2+2 door window frame too high ???
Hi, I have already posted this on jag-lovers, but want to try to find some help here, too. I can't get the passengers door window frame to fit. The rubber seal stucks on the roof gutter / the chrome cover strip. I cannot lower the door: It's very low AND panel gap is nice. I cannot lower the frame. ...
- Mon Mar 21, 2011 5:57 am
- Forum: Welcome!
- Topic: New Memeber in Frankfurt/Main Germany with some 3.8 E-Types
- Replies: 6
- Views: 4626
Hi, no- the body is painted (I bought it painted from Pete, so .....), but I overhauled a LOT of tech bits, galvanized a LOT of them. On the list for this year is to re-put the interior, re-fit the front frames + all tech bits EXCEPT the engine, cause these are the last 3 bits to overhaul: Engine, I...
- Sun Mar 20, 2011 10:40 pm
- Forum: Series 1
- Topic: Prop shaft gaitor for early S1 2+2 ?
- Replies: 5
- Views: 4012
- Sun Mar 20, 2011 10:09 pm
- Forum: Series 1
- Topic: Prop shaft gaitor for early S1 2+2 ?
- Replies: 5
- Views: 4012
Prop shaft gaitor for early S1 2+2 ?
All, I need a prop shaft gaitor. So I thought fine, buy it at Limora (in germany). They have the SC parts catalogue. Saidly, I got the bellows (?) type used in most cars. My car has a metal "cup" over the sliding joint, so I need some kind of a "tube" which is a bit like, I am very sorry to say the ...
- Sun Mar 20, 2011 9:54 pm
- Forum: General
- Topic: Chris Rooke's book
- Replies: 31
- Views: 21496
- Sun Mar 20, 2011 9:43 pm
- Forum: Welcome!
- Topic: New Memeber in Frankfurt/Main Germany with some 3.8 E-Types
- Replies: 6
- Views: 4626