Page 1 of 1

#1 New member

Posted: Sat Oct 05, 2019 5:31 pm
by Pguzman
Good afternoon all; My name is Philip Guzman, I am in the final steps on rebuilding a 1965 FHC. 1 also have a 1963 triumph TR4, and several brit motorcycles in various states of reassembly.. does anyone out there have any tips on installing the chrome drip rail covers ? I have three, none of which fit! Any tips will be greatly appreciated!

#2 Re: New member

Posted: Sat Oct 05, 2019 7:13 pm
by 265bhp
No tips Phillip...but welcome none the less..!

#3 Re: New member

Posted: Sun Oct 06, 2019 8:46 am
by malcolm
Yes, welcome!

#4 Re: New member

Posted: Sun Oct 06, 2019 10:48 am
by tim wood
Never done it myself but I recall an article either in the Colin ford booklet or more likely in the book by Chris Rooke where the issue is described in detail.
From what I remember they ended up being held in place with pieces of wood jammed against the workshop wall whilst the adhesive set !

#5 Re: New member

Posted: Sun Oct 06, 2019 11:42 am
by mgcjag
Use suction trim clamps to hold in place...just google them....Steve