Window frame ‘T’ seals - orientation?

Talk about E-Types here
User avatar

Topic author
rswaffie
Posts: 1647
Joined: Sat Jul 19, 2014 7:56 am
Location: Lincolnshire
Great Britain

#1 Window frame ‘T’ seals - orientation?

Post by rswaffie » Sun Aug 05, 2018 5:23 pm

Hi All,
I have the ‘T’ seals the fit along the top and forward face of the windo frame. The seal flange is off-set from centre so it looks like it should be fitted one way only!
Which way should it go? When closed, should it seal against the body at X or Y below?


Image
Richard

Previous owner and restorer of a S1 3.8 FHC Opalescent Golden Sand with Tan Trim 889504 (now sold and headed for Athens)

:swerve: :wrench: :hammer: :fingerscrossed:

Link:
BBcode:
HTML:
Hide post links
Show post links


paulsco
Posts: 825
Joined: Mon May 04, 2009 5:12 pm
Location: Oxfordshire
Great Britain

#2 Re: Window frame ‘T’ seals - orientation?

Post by paulsco » Mon Aug 06, 2018 12:23 pm

Hi Richard,

The seal sits with the curve facing outwards, away from the car; 'Y' is to the outside.

Paul
65 Series 1 FHC, 68 Jaguar 340

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Topic author
rswaffie
Posts: 1647
Joined: Sat Jul 19, 2014 7:56 am
Location: Lincolnshire
Great Britain

#3 Re: Window frame ‘T’ seals - orientation?

Post by rswaffie » Mon Aug 06, 2018 12:25 pm

Great, thanks Paul.
Richard

Previous owner and restorer of a S1 3.8 FHC Opalescent Golden Sand with Tan Trim 889504 (now sold and headed for Athens)

:swerve: :wrench: :hammer: :fingerscrossed:

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply Previous topicNext topic