Hi All,
I have the ‘T’ seals the fit along the top and forward face of the windo frame. The seal flange is off-set from centre so it looks like it should be fitted one way only!
Which way should it go? When closed, should it seal against the body at X or Y below?
Window frame ‘T’ seals - orientation?
#1 Window frame ‘T’ seals - orientation?
Richard
Previous owner and restorer of a S1 3.8 FHC Opalescent Golden Sand with Tan Trim 889504 (now sold and headed for Athens)
Previous owner and restorer of a S1 3.8 FHC Opalescent Golden Sand with Tan Trim 889504 (now sold and headed for Athens)
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#2 Re: Window frame ‘T’ seals - orientation?
Hi Richard,
The seal sits with the curve facing outwards, away from the car; 'Y' is to the outside.
Paul
The seal sits with the curve facing outwards, away from the car; 'Y' is to the outside.
Paul
65 Series 1 FHC, 68 Jaguar 340
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#3 Re: Window frame ‘T’ seals - orientation?
Great, thanks Paul.
Richard
Previous owner and restorer of a S1 3.8 FHC Opalescent Golden Sand with Tan Trim 889504 (now sold and headed for Athens)
Previous owner and restorer of a S1 3.8 FHC Opalescent Golden Sand with Tan Trim 889504 (now sold and headed for Athens)
Link: | |
BBcode: | |
HTML: | |
Hide post links |