ignition condensor
#1 ignition condensor
How do I replace the ignition condenser on my 70 etype?
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#2 Re: ignition condensor
This should be a very simple procedure....far easier to do than actually explain....look at it take a few photos and start to remove the old one takeing care with the small screw and plastic insulators....replace with the new one in the reverse order..the service manual for your car.will show details....Steve
Steve
69 S2 2+2 (just sold) ..Realm C type replica, 1960 xk150fhc
69 S2 2+2 (just sold) ..Realm C type replica, 1960 xk150fhc
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#3 Re: ignition condensor
Hi John,plugs points and condensor used to be a regular maintenance item in the cars of my youth,if your car is running fine I would leave well alone,a lot of suspect reproduction ignition components out there.
Regards Gerry 62 ots Ontario Canada.
Regards Gerry 62 ots Ontario Canada.
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#4 Re: ignition condensor
As Gerry says....regular job. Bit fiddly and be careful not to drop screws or nuts into the dizzy!
Julian the E-type man
1962 FHC
1966 MGB....fab little car too
1962 FHC
1966 MGB....fab little car too
Link: | |
BBcode: | |
HTML: | |
Hide post links |