Auto Bodycraft ; Wrenbury

Talk about E-Types here

Topic author
265bhp
Posts: 697
Joined: Wed Jan 26, 2011 10:29 pm
Location: surrey
Great Britain

#1 Auto Bodycraft ; Wrenbury

Post by 265bhp » Sat Jul 18, 2020 8:54 pm

Hi

Has anyone ever used these guys for painting, a friend who lives near to them needs his early 911 repainting after an extensive metalwork restoration
Would appreciate any feedback, good or bad so I can pass it on

Thanks
Jonathan
1963 3.8 FHC in slow restoration mode
1974 2.7 Carrera now as an RS Touring

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Series1 Stu
Posts: 1091
Joined: Thu Feb 02, 2017 12:26 pm
Location: Shropshire
Great Britain

#2 Re: Auto Bodycraft ; Wrenbury

Post by Series1 Stu » Sat Jul 18, 2020 10:50 pm

Yes, I've used them and they always have lots of (racing) E-Types hanging around. They specialise in race cars but say they do anything that needs paint. They also have a powder coating plant if you have need of that too.

Everything I've seen that they've done had been superb. They're about 4 miles away from me which is handy.

Regards
Stuart

If you can't make it work, make it complicated!

'62 FHC - Work In (slow) Progress
'69 Daimler 420 Sovereign
'78 Land Rover Series 3 109
'94 X300 XJR basket case

Link:
BBcode:
HTML:
Hide post links
Show post links


christopher storey
Posts: 4943
Joined: Sun Mar 09, 2008 3:07 pm
Location: cheshire , england
Great Britain

#3 Re: Auto Bodycraft ; Wrenbury

Post by christopher storey » Sun Jul 19, 2020 7:26 am

Yes : they did a superb job on my Porsche 997 after I left the bonnet unhooked and it blew up and hit the roof !

Link:
BBcode:
HTML:
Hide post links
Show post links


Topic author
265bhp
Posts: 697
Joined: Wed Jan 26, 2011 10:29 pm
Location: surrey
Great Britain

#4 Re: Auto Bodycraft ; Wrenbury

Post by 265bhp » Sun Jul 19, 2020 9:02 am

Thanks both...sounds positive..!
1963 3.8 FHC in slow restoration mode
1974 2.7 Carrera now as an RS Touring

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply Previous topicNext topic