composite head gasket fitting

Technical advice Q&A
User avatar

Topic author
MarkRado
Posts: 338
Joined: Fri Jan 26, 2018 9:13 am
Location: Graz
Austria

#1 composite head gasket fitting

Post by MarkRado » Fri Apr 27, 2018 7:19 am

Further to my posting regarding head studs and tightening torque, I received a fitting guide for the composite head gasket together with the gasket kit (from http://www.jmgaskets-seals.co.uk) which is very informative.
Firstly they recommend tightening in three stages (40/55/65), secondly the final torque is 20% higher than the original 54. Thirdly they recommend fitting new studs.
Last autumn I fitted a composite gasket (a first for me), torqued it to 54 lbft and it soon started leaking :shock:
I have to admit I had left the old studs in place and the head had not been skimmed.
This time I take no risks; new studs ordered and head has been skimmed (6 thou). Keep your fingers crossed!
Mark
1963 OTS 880436

Link:
BBcode:
HTML:
Hide post links
Show post links