Indicator help please

Technical advice Q&A

Topic author
Spark
Posts: 134
Joined: Sat Jul 20, 2013 2:53 pm
Location: Yorkshire
Great Britain

#1 Indicator help please

Post by Spark » Fri Dec 28, 2018 12:41 pm

Series 1 2+2 coupe
Need some help please
Can’t get the RH rear turn signal to operate, left side rear works fine. Bonnet isn’t fitted yet
Car has a new loom, new light units and new indicator stalk

Flasher unit is working correctly as the left indicator works correctly and has good repeat time
Have checked the earthing of the light/flasher unit.

Any suggestions please for checks or test to try
Thanks
Phil

Link:
BBcode:
HTML:
Hide post links
Show post links


cactusman
Posts: 1692
Joined: Wed Nov 14, 2012 11:09 pm
Location: Hertfordshire
Great Britain

#2 Re: Indicator help please

Post by cactusman » Fri Dec 28, 2018 5:15 pm

There is a set of bullet joiners on the rhs under the end of the dash where the main dash loom joins the one that runs to the back. Check there or else the wiring in the boot around the light. Lastly check the wiring to the flasher stalk. There are quite a few bullet connections and I'd guess one is loose. Might be wise to check the bulb works too. A cheap multimeter is very handy for tracing continuity.
Julian the E-type man
1962 FHC
1966 MGB....fab little car too

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply Previous topicNext topic