Hi, my Haynes manual says that on a 2+2, you can lift out the bottom seat cushion to access the 4 nuts which hold the unit in place. Doesn't seem to be the case on my 1969 series 2 2+2.
If I slide the seat right forward, I can get to the back 2 nuts, but how do I get to the front 2?
Removing seats from a 2+2
#1 Removing seats from a 2+2
Malcolm
I only fit in a 2+2, so got one!
1969 Series 2 2+2
2009 Jaguar XF-S
2015 F Type V6 S
I only fit in a 2+2, so got one!
1969 Series 2 2+2
2009 Jaguar XF-S
2015 F Type V6 S
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#2 Re: Removing seats from a 2+2
Hi Malcom...remove 2 rear screws/bolts.....nothing to undo on front its held by mushroom top retainer....so either move seat forward or backwards( cant remember which) and lift out...Steve
Steve
69 S2 2+2 (just sold) ..Realm C type replica, 1960 xk150fhc
69 S2 2+2 (just sold) ..Realm C type replica, 1960 xk150fhc
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#3 Re: Removing seats from a 2+2
Ah, ok. Misled by Haynes manual!
Thanks.
Thanks.
Malcolm
I only fit in a 2+2, so got one!
1969 Series 2 2+2
2009 Jaguar XF-S
2015 F Type V6 S
I only fit in a 2+2, so got one!
1969 Series 2 2+2
2009 Jaguar XF-S
2015 F Type V6 S
Link: | |
BBcode: | |
HTML: | |
Hide post links |