8103 and 8107 sealing washers - valves on oil filter head

Technical advice Q&A
User avatar

Topic author
rfs1957
Posts: 944
Joined: Sat Jan 15, 2011 2:52 pm
Location: Montpellier, France
France

#1 8103 and 8107 sealing washers - valves on oil filter head

Post by rfs1957 » Thu Aug 08, 2019 4:08 pm

I touched on these here

http://forum.etypeuk.com/viewtopic.php? ... 03#p116995

and am putting them in this separate post to make them easier to search for.

Couldn't find any usual suspect who stocked them as Jag parts.

However, smaller one (8103, under the balance valve) can be replaced by 20mm x 24mm x 1.5mm, as is, and the larger one (8107, under the relief valve adapter) by 22mm x 27mm x 1.5mm which just needs about 0.3 taking off the OD, both available from GWR Fasteners - SY11 4AD.

Bought five of each so if anyone wants a pair speak up and they can have them for free in the post.
Rory
3.8 OTS Cream 877393 Built May 28th 1962
1978 Mini Van
(plus bevel and belt single-cylinder Ducatis)

Link:
BBcode:
HTML:
Hide post links
Show post links