Underdash harduras

Technical advice Q&A
User avatar

Topic author
Mich7920
Posts: 662
Joined: Sun Mar 15, 2015 4:43 pm
Location: France
France

#1 Underdash harduras

Post by Mich7920 » Tue Sep 24, 2019 8:37 am

Hi all,
Did somebody could tell me if this part is conform for a LHD ?
Beginning at the left of the car, It's the first underdash hardura around the clutch and brake pedales.

Image

Thanks
Mich
Michel
1965 E Type FHC - On the road - 1963 E Type OTS - Angus Restoration
Gran Torino Sport 1975 - Renault 4cv 1956 - CItroen 15/6 1951 - CItroen Traction 1945
Citroen Coupé docteur 5Hp 1924 - Citroen B12 1926 - Torpedo Sygma 1913
Harley D. 1915 sidecar

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

edriver
Posts: 55
Joined: Tue Jan 02, 2018 2:43 pm
Location: Upper Bavaria
Germany

#2 Re: Underdash harduras

Post by edriver » Tue Sep 24, 2019 11:29 am

I have a similar Hardura panel left over, because a very large 4 way flasher switch is installed on the left side of the steering column on mine. It does look a bit different, though and I got it from Aldridge. The straight edge needs to go to the outboard side of a L/H drive S1.
Image
Klaus
1963 FHC 889633, 1979 Porsche 928, 1991 Mazda MX-5

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Topic author
Mich7920
Posts: 662
Joined: Sun Mar 15, 2015 4:43 pm
Location: France
France

#3 Re: Underdash harduras

Post by Mich7920 » Wed Sep 25, 2019 9:57 am

Thanks for this answer. It confirm what I thought but the design of your part is quit different from mine.

As the both parts are remade, Is there somebody with the original design ?
Michel
1965 E Type FHC - On the road - 1963 E Type OTS - Angus Restoration
Gran Torino Sport 1975 - Renault 4cv 1956 - CItroen 15/6 1951 - CItroen Traction 1945
Citroen Coupé docteur 5Hp 1924 - Citroen B12 1926 - Torpedo Sygma 1913
Harley D. 1915 sidecar

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

edriver
Posts: 55
Joined: Tue Jan 02, 2018 2:43 pm
Location: Upper Bavaria
Germany

#4 Re: Underdash harduras

Post by edriver » Wed Sep 25, 2019 6:47 pm

Hi Mich, me again.
Looking at the John Skinner Website and pictures, they show exactly your underdash hardura pattern.
https://www.john-skinner.co.uk/jaguar/e ... 8ltr/#trim
For the 2+2 it looks different and a RHD has the cutout for the accelerator pedal on the lower end of the straight side. Let me know, if you can make yours fit.
Klaus
Klaus
1963 FHC 889633, 1979 Porsche 928, 1991 Mazda MX-5

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply Previous topicNext topic