Page 1 of 1

#1 Screw source

Posted: Wed Nov 11, 2020 7:09 pm
by MLBS3V12
I'm looking for the screws closing the rear lignt and the covers side light  :thumbsup:  . There is not any reference on the Jaguar documentation.  :scratchheadyellow:
Hope someone can help.

#2 Re: Screw source

Posted: Thu Nov 12, 2020 12:35 pm
by ysmalkie

#3 Re: Screw source

Posted: Thu Nov 12, 2020 5:02 pm
by MSM
MLBS3V12 wrote:
Wed Nov 11, 2020 7:09 pm
I'm looking for the screws closing the rear lignt and the covers side light  :thumbsup:  . There is not any reference on the Jaguar documentation.  :scratchheadyellow:
Hope someone can help.
If you mean the front and rear lights on S2 and S3 cars the screws are 6-32 UNC x 1 inch long pan head. Not sure if they are Philips or Pozidriv.

#4 Re: Screw source

Posted: Fri Nov 13, 2020 9:18 am
by Bob.
The SCParts catalogue gives details for each screw - start here and drill down to individual screws. https://www.scparts.co.uk/sc_en/british ... board.html

#5 Re: Screw source

Posted: Sat Nov 14, 2020 5:58 am
by MLBS3V12
Thank you all for your feedback. :thankyouyellow: