Page 1 of 1

#1 Oil filter bolts

Posted: Sat Jan 09, 2021 10:26 am
by phoenix
S 1 4.2 .Hi I am just fitting the oil filter housing and I noticed a bolt hole at the centre bottom on the block with no corresponding hole in the fitting . Is this OK ( it has the spin on conversion fitted which I took off and checked behind)

#2 Re: Oil filter bolts

Posted: Sun Jan 10, 2021 10:42 am
by steve3.8
There should be a slotted grub screw in the spare tapped hole to blank it off --.

#3 Re: Oil filter bolts

Posted: Sun Jan 10, 2021 11:47 am
by phoenix
Thanks for that Steve.