3.8 OTS Seats - Now Sold
#1 3.8 OTS Seats - Now Sold
I've managed to source some original 3.8 OTS seats for my 1964 S1 which I shall shortly have restored. A couple of quick questions:
- Were all seat frames grey throughout 3.8 production? Mine are black (with very old paint). The seats have had some previous leather repairs so I know they have been worked on but am not sure if this would have extended to the frames. I want to ensure (when the seats are restored) that they go back to the specification in force at that time hence wanting to get the colour right.
- There are three small screws which protrude through the base (see photos below). Does anyone know what these are for?
Many thanks!
- Were all seat frames grey throughout 3.8 production? Mine are black (with very old paint). The seats have had some previous leather repairs so I know they have been worked on but am not sure if this would have extended to the frames. I want to ensure (when the seats are restored) that they go back to the specification in force at that time hence wanting to get the colour right.
- There are three small screws which protrude through the base (see photos below). Does anyone know what these are for?
Many thanks!
Last edited by Philk on Sat Feb 17, 2018 7:42 am, edited 1 time in total.
Phil
1964 S1 3.8 OTS
1964 S1 3.8 OTS
Link: | |
BBcode: | |
HTML: | |
Hide post links |
-
- Posts: 3308
- Joined: Thu Jun 19, 2014 3:08 pm
- Location: Near Andover, Hampshire,in D.O. Blighty
#2 Re: 3.8 OTS Seats
Phil, can't help you with your questions, but have you read through the various comments made about early seats? Leg room, head room etc.
Just to say you might wish to check on all that before your expense of refurbishment.
Geoff
Just to say you might wish to check on all that before your expense of refurbishment.
Geoff
S2 FHC Light Blue
S2 OTS LHD - RHD full restoration
S2 OTS LHD - RHD full restoration
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#3 Re: 3.8 OTS Seats
Fortunately, at 5'8 these are not so much of an issue for me. My car currently has S1.5 seats in which also need refurbishing (the back's are torn from occasional contact with the different hood frame the 3.8 has). As such, I've decided to go with originality and to take the car back to specification rather than pay to restore something that should not be in the car.Gfhug wrote:Phil, can't help you with your questions, but have you read through the various comments made about early seats? Leg room, head room etc.
Just to say you might wish to check on all that before your expense of refurbishment.
Geoff
Phil
1964 S1 3.8 OTS
1964 S1 3.8 OTS
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#4 Re: 3.8 OTS Seats
Phil -
I have never seen a black seat but that is from a limited sample so in your situation I would check with one of the trimmers like BAS who deal with the seats regularly.
Joe
I have never seen a black seat but that is from a limited sample so in your situation I would check with one of the trimmers like BAS who deal with the seats regularly.
Joe
1963 3.8 OTS
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#5 Re: 3.8 OTS Seats
The set in my 1963 FHC were black.
Andrew.
881824, 1E21538. 889457. 1961 4.3l Mk2. 1975 XJS. 1962 MGB
http://www.projectetype.com/index.php/the-blog.html
Adelaide, Australia
881824, 1E21538. 889457. 1961 4.3l Mk2. 1975 XJS. 1962 MGB
http://www.projectetype.com/index.php/the-blog.html
Adelaide, Australia
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#6 Re: 3.8 OTS Seats
That's really interesting to note. Looking at the construction of the 3.8 OTS seats I've purchased, they're from just after the conversion to the steeper rake and the use of longer seat runners in 1962. It would be very interesting to see whether other seats had black frames from this period.abowie wrote:The set in my 1963 FHC were black.
Phil
1964 S1 3.8 OTS
1964 S1 3.8 OTS
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#7 Re: 3.8 OTS Seats
The seat frames in my '64 were grey. No evidence of black.
Eric
Link: | |
BBcode: | |
HTML: | |
Hide post links |
-
- Posts: 38
- Joined: Wed Nov 27, 2013 1:31 am
- Location: Northern VA
#8 Re: 3.8 OTS Seats
Seats in my 62 FHC are black roadster type - original
Airborne62
'62 FHC
'62 FHC
Link: | |
BBcode: | |
HTML: | |
Hide post links |
-
- Posts: 5698
- Joined: Sun Mar 09, 2008 3:07 pm
- Location: cheshire , england
#9 Re: 3.8 OTS Seats
I think the three holes possibly are to take the hooks supporting a rubber diaphragm
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#10 Re: 3.8 OTS Seats
My FHC (end 62, very early 63) has grey roadster seats. And for sure original!
Cheers
Cheers
Link: | |
BBcode: | |
HTML: | |
Hide post links |
-
- Posts: 1650
- Joined: Thu Feb 02, 2017 12:26 pm
- Location: Shropshire
#11 Re: 3.8 OTS Seats
My 62 FHC (888007) seat frames are grey.
I stripped them and had BAS restore and retrim them.
Regards
I stripped them and had BAS restore and retrim them.
Regards
Stuart
If you can't make it work, make it complicated!
'62 FHC - Nearing completion
'69 Daimler 420 Sovereign
'78 Land Rover Series 3 109
If you can't make it work, make it complicated!
'62 FHC - Nearing completion
'69 Daimler 420 Sovereign
'78 Land Rover Series 3 109
Link: | |
BBcode: | |
HTML: | |
Hide post links |