Air con wiring

Talk about the E-Type Series 1

Topic author
RobertGrieve
Posts: 68
Joined: Sat Aug 05, 2017 10:11 pm
Great Britain

#1 Air con wiring

Post by RobertGrieve » Fri Feb 09, 2018 6:49 pm

Hi all,

Today I re fitted the air conditioning facia and connected up the speed switch and temp control to the best of my knowledge based on photos at the time of disassembly.

I have tested the speed switch and the resistance is moving in line with expectation. However the coiled resistance wire itself is getting hot, and one of them is glowing red after period of time which doesn’t feel right at all.

Wiring diagrams seem very tricky to get hold of.

I have noticed that the white wire here from the temp control is not yet connected to anything - but I do not know where it is meant to go.

I momenterally got a reaction from the motor when turned on but have not been able to get one since.

Any advise appreciated, can’t seems to find much information on my system (delanair) at all

Cheers, Rob
Image
1966 Series 1 2+2 (LHD), Manual, AC

Link:
BBcode:
HTML:
Hide post links
Show post links


mgman
Posts: 5
Joined: Sun Oct 08, 2017 11:41 am
Location: cornwall
Great Britain

#2 Re: Air con wiring

Post by mgman » Sun Aug 04, 2019 2:08 pm

You have probably worked it out by now nut on mine the white wire goes to the compressor clutch

Link:
BBcode:
HTML:
Hide post links
Show post links


johnetype
Posts: 384
Joined: Sun Feb 26, 2012 11:54 pm
Location: Worcestershire
Great Britain

#3 Re: Air con wiring

Post by johnetype » Sun Aug 04, 2019 5:34 pm

Although it's held under Series 2 manuals in the Knowledge base, I suspect the Air Conditioning manual at item 18 and the wiring diagrams in it may be of some help.
John

1969 Series 2 FHC

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply Previous topicNext topic