Does the grab handle chrome fixing attach to the A-pillar via self tapping screws or is the pillar threaded?
Thanks
Interior grab handle to A Pillar fixings??
#2 Re: Interior grab handle to A Pillar fixings??
Hi
Mine was attached with two slot head self tappers, however I would check the jaguar spare parts manual where it should be listed.
I’m away at Goodwood but will check when I return
Robbie
Mine was attached with two slot head self tappers, however I would check the jaguar spare parts manual where it should be listed.
I’m away at Goodwood but will check when I return
Robbie
Robbie 1962 3.8 Coupe OSG 1962 OTS ODG
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#3 Re: Interior grab handle to A Pillar fixings??
Hi again
Its attached by two self tapping slot headed screws
Page 242 of spare parts catalogue.
Part no. BD 540/19 BUT its not listed as available on sngb website
I’m sure it’s just a question of purchasing appropriate screws from a supplier
Robbie
Its attached by two self tapping slot headed screws
Page 242 of spare parts catalogue.
Part no. BD 540/19 BUT its not listed as available on sngb website
I’m sure it’s just a question of purchasing appropriate screws from a supplier
Robbie
Robbie 1962 3.8 Coupe OSG 1962 OTS ODG
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#4 Re: Interior grab handle to A Pillar fixings??
Hi Robbie
Thanks very much for that, much appreciated, it feels like a bodge but if it was good enough for Jaguar it’s good enough for me - and I spent plenty of years hanging on to the one in my dads car as a kid so it’s obviously strong enough!
Jeremy
Thanks very much for that, much appreciated, it feels like a bodge but if it was good enough for Jaguar it’s good enough for me - and I spent plenty of years hanging on to the one in my dads car as a kid so it’s obviously strong enough!
Jeremy
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#5 Re: Interior grab handle to A Pillar fixings??
Hi Jeremy
I can assure you it’s a strong fix.....it took a massive effort to unscrew it when stripping the car!!
BTW I’ve managed to give the leather handle a good clean and polish..the stuffing is a little hand shaped but nice and original !
Regards
Robbie
I can assure you it’s a strong fix.....it took a massive effort to unscrew it when stripping the car!!
BTW I’ve managed to give the leather handle a good clean and polish..the stuffing is a little hand shaped but nice and original !
Regards
Robbie
Robbie 1962 3.8 Coupe OSG 1962 OTS ODG
Link: | |
BBcode: | |
HTML: | |
Hide post links |