3.8 Choke Cable, Clamp For Outer At Lever

Talk about the E-Type Series 1

Topic author
glennglenn
Posts: 11
Joined: Fri Jul 18, 2008 6:51 pm
Great Britain

#1 3.8 Choke Cable, Clamp For Outer At Lever

Post by glennglenn » Sat Oct 20, 2018 4:47 pm

Is there a clamp to suport the outer cover in the cockpit by the choke lever? Mine seems to be too lose when putting choke back to cold normal running, the chokes are not fully releasing.Also what’s the correct route for the cable, I know this has been covered before but the images have been erased. Thanks!

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Fasthound1963OTS
Posts: 20
Joined: Sun Apr 22, 2018 1:54 pm
Location: Potomac, MD
United States of America

#2 Re: 3.8 Choke Cable, Clamp For Outer At Lever

Post by Fasthound1963OTS » Mon Oct 22, 2018 5:34 pm

This might help. I finally routed mine similar to the photos shown near the end of the thread.

https://forums.jag-lovers.com/t/choke-c ... /352541/11
1963 3.8L S1 OTS - apparently resurrected from multiple sources because not a single number matches :wink:

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

mark10337
Posts: 694
Joined: Wed Jul 22, 2015 11:11 am
Location: Switzerland
Switzerland

#3 Re: 3.8 Choke Cable, Clamp For Outer At Lever

Post by mark10337 » Sat Nov 17, 2018 7:03 pm

http://forum.etypeuk.com/viewtopic.php? ... ram#p80556

The choke cables are routed via the hole labelled ??? on the bottom line of the diagram.
-Mark

1969 Series 2 OTS, Regency Red
'Life's to short to drive a boring car'

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply Previous topicNext topic