Hi All
I am looking for a rear end assembly for a s1 4:2 DHC.looking for some advice as were/who is the best in terms of the best quality.
Many Thanks Karl
Body parts
-
- Posts: 5698
- Joined: Sun Mar 09, 2008 3:07 pm
- Location: cheshire , england
#2 Re: Body parts
Karl : what do you mean by "rear end" ? Presuming this to be the boot floor and lower rear valances etc, then I would have no hesitation in recommending Hutson's for the parts . Their parts are made in zintek ( effectively, galvanised ) and therefore are superior in terms of durability to any others. They do , in any case, make many parts for other suppliers
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#3 Re: Body parts
Thanks for that Christopher that is exactly what I’m after I will give them a ring in the morning.
Cheers
Cheers
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#4 Re: Body parts
I used the Robey Panels version but it didn't fit too well as supplied and needed some minor adjustment. I would go with Hutsons if I was to do it again.
1964 FHC 4.2
Etype restoration blog http://connor.org.uk
Etype restoration blog http://connor.org.uk
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#5 Re: Body parts
Thanks for the advice Chris will be in touch with them later today.
Link: | |
BBcode: | |
HTML: | |
Hide post links |
-
- Posts: 1295
- Joined: Tue Jun 07, 2016 8:26 pm
- Location: Boston UK
#6 Re: Body parts
Or maybe this would help? Maybe not, maybe its a bit rough!
https://www.ebay.co.uk/itm/Series-1-Jag ... %7Ciid%3A1
https://www.ebay.co.uk/itm/Series-1-Jag ... %7Ciid%3A1
Its true, but Enzo never said it
Too many E types
XK120 SUs
Too many E types
XK120 SUs
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#7 Re: Body parts
Thanks James just s bit too expensive for me.
Karl
Karl
Link: | |
BBcode: | |
HTML: | |
Hide post links |