Talk about the E-Type Series 1
-
Topic author
Herblay
- Posts: 75
- Joined: Sun Oct 12, 2014 7:30 pm
- Location: Spain

Post
by Herblay » Mon Sep 16, 2019 9:14 am
I'm trying to find any providers of one of the securing clips for the luggage lid, which is badly damaged in my car. The piece is depicted in the attached picture.
Any reference most welcomed! I haven't found replacements for this piece in any common Jag materials providers:

S1 FHC 3.8
-
abowie
- Posts: 3016
- Joined: Wed Sep 07, 2011 9:15 pm
- Location: Australia
-
Contact:

Post
by abowie » Mon Sep 16, 2019 8:39 pm
I bought what I thought were the correct ones from SNGB but they were for the larger post locating the boot boards.
It may be that they're available as a generic part from trim suppliers but I too haven't found them.
I plan to make some. I'll probably use the steel packing "tape" used to hold crates together for shipping.
-
Topic author
Herblay
- Posts: 75
- Joined: Sun Oct 12, 2014 7:30 pm
- Location: Spain

Post
by Herblay » Tue Sep 17, 2019 4:09 pm
Thank you. It is a pity there are no current providers for such a piece. As you suggest it is probably a matter of crafting something
S1 FHC 3.8
-
abowie
- Posts: 3016
- Joined: Wed Sep 07, 2011 9:15 pm
- Location: Australia
-
Contact:

Post
by abowie » Tue Sep 17, 2019 11:49 pm
SNGB did have the pin; for an extortionate price.
-
Topic author
Herblay
- Posts: 75
- Joined: Sun Oct 12, 2014 7:30 pm
- Location: Spain

Post
by Herblay » Wed Sep 18, 2019 9:26 am
S1 FHC 3.8
-
ysmalkie
- Posts: 307
- Joined: Fri May 16, 2014 9:11 am
- Location: Poland

Post
by ysmalkie » Sat Sep 21, 2019 10:00 am
Hi,
I may have some - how many do you need?
Tadek
Tadek
e-type S1 3.8 FHC - in restoration phase...
Jaguar XK120 OTS
Austin-Healey 100 BN2
-
Topic author
Herblay
- Posts: 75
- Joined: Sun Oct 12, 2014 7:30 pm
- Location: Spain

Post
by Herblay » Sat Sep 21, 2019 7:05 pm
As a matter of fact, just one. Send you a PM
S1 FHC 3.8
-
abowie
- Posts: 3016
- Joined: Wed Sep 07, 2011 9:15 pm
- Location: Australia
-
Contact:

Post
by abowie » Wed Sep 25, 2019 12:01 am
Hard to tell but I think these are the larger ones that hold the boot boards in place.
-
edriver
- Posts: 55
- Joined: Tue Jan 02, 2018 2:43 pm
- Location: Upper Bavaria

Post
by edriver » Wed Sep 25, 2019 4:31 am
Yes, hard to tell from the picture, but BD.22348 are the smaller ones for the hinged extension
The Bresco reference is "Latch Clip. Jaguar 'E' Type. Cross-Ref: BD22348"
Klaus
1963 FHC 889633, 1979 Porsche 928, 1991 Mazda MX-5