I need to assemble my seat slides - they use rubber o-rings for rollers.
Has anyone figured out the correct size/type?
They look like they have a crossection of 4.7mm (3/16") and inner diameter of 7.9mm (5/16")
Tadek
seat slide o-rings
#1 seat slide o-rings
Tadek
e-type S1 3.8 FHC - in restoration phase...
Jaguar XK120 OTS
Austin-Healey 100 BN2
e-type S1 3.8 FHC - in restoration phase...
Jaguar XK120 OTS
Austin-Healey 100 BN2
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#2 Re: seat slide o-rings
Hi,
I used some hard tyres from a model car (dinky I think) they have stood the test of 6 years with no problems. I was careful to keep grease off them.
I used some hard tyres from a model car (dinky I think) they have stood the test of 6 years with no problems. I was careful to keep grease off them.
61 RHD OBL DHC
61 flat floor DHC
61 FHC
63 FHC
66 FHC (QUAD LIGHTS)
61 flat floor DHC
61 FHC
63 FHC
66 FHC (QUAD LIGHTS)
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#3 Re: seat slide o-rings
interesting solution ! :-)
Tadek
e-type S1 3.8 FHC - in restoration phase...
Jaguar XK120 OTS
Austin-Healey 100 BN2
e-type S1 3.8 FHC - in restoration phase...
Jaguar XK120 OTS
Austin-Healey 100 BN2
Link: | |
BBcode: | |
HTML: | |
Hide post links |