Hi I have tried replacing the dash bulbs with led,s but they didnt work , There are 2 flying leads that take leds & the flash in time with the indicators , perhaps the PO has tried this before?
Also the charging system will not work with an led bulb in the ignition lamp holder ?
Quite strange. any ideas ? TIA
indicator bulbs on the dash
-
Topic author - Posts: 6
- Joined: Sat Sep 11, 2021 6:15 pm
#2 Re: indicator bulbs on the dash
Yes charging wont work as not enough current through led to exite the alternator field.....probably same with indicators..you need to do a bit of resesrch to use led replacements....Steve
Steve
69 S2 2+2 (just sold) ..Realm C type replica, 1960 xk150fhc
69 S2 2+2 (just sold) ..Realm C type replica, 1960 xk150fhc
Link: | |
BBcode: | |
HTML: | |
Hide post links |
-
Topic author - Posts: 6
- Joined: Sat Sep 11, 2021 6:15 pm
#3 Re: indicator bulbs on the dash
Hi what about fitting resistors? TIA Ron
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#4 Re: indicator bulbs on the dash
Dear Ronald,
this is quite normal and expected behaviour. It is well documented, both on this website and all over the interweb. I suggest you simply continue using the original filament bulbs for these two applications.
kind regards
Marek
this is quite normal and expected behaviour. It is well documented, both on this website and all over the interweb. I suggest you simply continue using the original filament bulbs for these two applications.
kind regards
Marek
Link: | |
BBcode: | |
HTML: | |
Hide post links |