Mechanical Oil Pressure Gauge

SimonBrown · Post by **SimonBrown** » Wed May 23, 2018 4:19 pm

I wish to check the Oil Pressure on my Series 2 OTS and already have an old Smiths mechanical gauge. Would anybody know where I could obtain a pipe and fittings to connect the gauge to the car, preferably where the sender screws in?

Thank you

Simon

Post by **Heuer** » Wed May 23, 2018 5:06 pm

Try M&C Wilkinson as they sell a complete kit so can also supply the fittings without the gauge.

cactusman · Post by **cactusman** » Wed May 23, 2018 5:07 pm

Places like Demon Tweeks sell all the fittings and adaptors you will ever need. If you are replacing the unreliable electric one then remove the sender and fit your pipe there. If you are adding it as second gauge then e.g. Demon Tweeks sell T pieces to allow both the electrical sensor and your mechanical one to be plumbed to the same take off at the oil filter housing. Just making clear I have no connection to Demon Tweeks...don't think I have ever ordered from them...

JJC · Post by **JJC** » Thu May 24, 2018 5:23 am

In the US, try Nossinger Instruments, Mamaroneck, NY Smiths dealer. The best !! Just have to add a bit for shipping if you can't find nearby.

John

SimonBrown · Post by **SimonBrown** » Thu May 24, 2018 8:19 am

Ordered from M and C Wilkinson

Thanks for your help

JJC · Post by **JJC** » Fri Jun 15, 2018 7:31 pm

Check my post below......only problem will be shipping cost.

JJC

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

The 'E' Type Forum

Mechanical Oil Pressure Gauge

#1 Mechanical Oil Pressure Gauge

#2 Re: Mechanical Oil Pressure Gauge

#3 Re: Mechanical Oil Pressure Gauge

#4 Re: Mechanical Oil Pressure Gauge

#5 Re: Mechanical Oil Pressure Gauge

#6 Re: Mechanical Oil Pressure Gauge