Radiator hose kit

Talk about the E-Type Series 1
User avatar

Topic author
peters3103
Posts: 145
Joined: Sun Aug 05, 2012 7:25 am
Location: Canberra Australia
Australia

#1 Radiator hose kit

Post by peters3103 » Sun Feb 10, 2019 9:04 am

Hi, I’m looking at SNGB’s 3.8 cooling system hose kit. Has anyone bought/used this kit and if so how’s the quality and fit? Does it look correct?Any other supplier suggestions? Actually only need the 4 top and bottom rad hoses but SNGB only have 3 of them in “standard” (which I presume means genuine?) and the other one is “aftermarket”. The full kit is only £9 more anyway.

Pete
November 61 flat floor FHC 885175
1999 XKR Coupe

Link:
BBcode:
HTML:
Hide post links
Show post links


cactusman
Posts: 1799
Joined: Wed Nov 14, 2012 11:09 pm
Location: Hertfordshire
Great Britain

#2 Re: Radiator hose kit

Post by cactusman » Sun Feb 10, 2019 9:50 am

I fitted a set...think they came from SNGB. Standard reinforced. 12 months on they seem fine. Cost about £60 if I remember right. Fitted perfectly. The set I got had both types of top hose from the thermostat to the header...straight with concertina section and kinked for the later type header....nice touch. :bigrin: p.s. I got a set of stainless steel jubilee type clips too...
Julian the E-type man
1962 FHC
1966 MGB....fab little car too

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Heuer
Administrator
Posts: 12260
Joined: Sat Mar 01, 2008 5:29 pm
Location: Nottinghamshire
Great Britain

#3 Re: Radiator hose kit

Post by Heuer » Sun Feb 10, 2019 12:17 pm

Depends on how "correct" you want to be. The original 3.8 top hose was convoluted on cars up to 850657/879044/861091/888241- it was straight after that because a 7psi cap was used. The original was cotton covered and given its prominence in the engine bay certainly worth searching out as it is another early 3.8 icon:
Image
You can buy one from here if they still have stock: http://www.billtracyjaguar.com/xktopho38ety.html

More information here: http://forum.etypeuk.com/viewtopic.php?p=100267#p100267
David Jones
S1 OTS OSB; S1 FHC ODB

Add your E-Type to our World Map: viewtopic.php?f=1&t=1810

Link:
BBcode:
HTML:
Hide post links
Show post links


Gerry
Posts: 28
Joined: Thu Jan 25, 2018 6:50 pm
Canada

#4 Re: Radiator hose kit

Post by Gerry » Sun Feb 10, 2019 7:20 pm

Hi Pete,try your local car parts place,some one on Jaglovers kindly put up a list of gates hose equivalents.I ended up with Dayco equivalent to the Gates!
Bottom hose #70389
Top hose #71011
You may have to trim a bit off the length,the last ones I installed lasted about 20yrs.

Hope this helps Gerry 62 0ts Ontario Canada.

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Topic author
peters3103
Posts: 145
Joined: Sun Aug 05, 2012 7:25 am
Location: Canberra Australia
Australia

#5 Re: Radiator hose kit

Post by peters3103 » Sun Feb 10, 2019 9:38 pm

Thanks for advice gents, David, is the other top hose from the radiator to header tank also supposed to be cotton covered? It appears the early convoluted cotton covered hose is still available from Bill Tracy at $65 and suits XK150 too.

Pete
November 61 flat floor FHC 885175
1999 XKR Coupe

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

JJC
Posts: 349
Joined: Fri Apr 21, 2017 3:06 pm
United States of America

#6 Re: Radiator hose kit

Post by JJC » Sun Feb 10, 2019 11:06 pm

Xk's Unlimited , in California a great source also. Little tip....when your installing new hoses, place a little Vaseline around the inside of the hose, right around both ends. Adds a bit of life to the hose, and of course, slides on just a bit easier.

JC

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Topic author
peters3103
Posts: 145
Joined: Sun Aug 05, 2012 7:25 am
Location: Canberra Australia
Australia

#7 Re: Radiator hose kit

Post by peters3103 » Mon Feb 11, 2019 4:25 am

Good advice with the Vaseline or a smear of rubber grease? I’ve tried ordering the cloth covered hose from Bill Tracy but it won’t “add to cart” so presumably it’s not available. I’ll try to contact them for confirmation.
November 61 flat floor FHC 885175
1999 XKR Coupe

Link:
BBcode:
HTML:
Hide post links
Show post links


cactusman
Posts: 1799
Joined: Wed Nov 14, 2012 11:09 pm
Location: Hertfordshire
Great Britain

#8 Re: Radiator hose kit

Post by cactusman » Mon Feb 11, 2019 7:51 am

I used red rubber grease. Bought a tin for about £12. I now have several lifetimes supply :bigrin: it is red and stains everything you wear so be warned!
Julian the E-type man
1962 FHC
1966 MGB....fab little car too

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Heuer
Administrator
Posts: 12260
Joined: Sat Mar 01, 2008 5:29 pm
Location: Nottinghamshire
Great Britain

#9 Re: Radiator hose kit

Post by Heuer » Mon Feb 11, 2019 10:47 am

JJC wrote:
Sun Feb 10, 2019 11:06 pm
when your installing new hoses, place a little Vaseline around the inside of the hose, right around both ends. Adds a bit of life to the hose, and of course, slides on just a bit easier.
Noooooo! Vaseline may help get the hose on but it will make it almost impossible to remove. Vaseline, being a petroleum product, will be absorbed into the rubber and remaining residue will act as an adhesive. Red rubber grease is the only thing you should use.
David Jones
S1 OTS OSB; S1 FHC ODB

Add your E-Type to our World Map: viewtopic.php?f=1&t=1810

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

JJC
Posts: 349
Joined: Fri Apr 21, 2017 3:06 pm
United States of America

#10 Re: Radiator hose kit

Post by JJC » Mon Feb 11, 2019 12:51 pm

good tip !

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Mich7920
Posts: 492
Joined: Sun Mar 15, 2015 4:43 pm
Location: France
France

#11 Re: Radiator hose kit

Post by Mich7920 » Mon Feb 11, 2019 5:24 pm

Aand what about water and soap ?
Michel
1963 E Type OTS - Angus Restoration
1965 E Type FHC - Front Restoration

Link:
BBcode:
HTML:
Hide post links
Show post links


spanish 2+2
Posts: 83
Joined: Fri May 16, 2014 5:17 pm
Location: Murcia Spain
Spain

#12 Re: Radiator hose kit

Post by spanish 2+2 » Mon Feb 11, 2019 5:59 pm

plus one for warm water and soap.
69 s2 2+2 Signal Red

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Heuer
Administrator
Posts: 12260
Joined: Sat Mar 01, 2008 5:29 pm
Location: Nottinghamshire
Great Britain

#13 Re: Radiator hose kit

Post by Heuer » Mon Feb 11, 2019 8:00 pm

Again, good for putting hoses on but the water will evaporate and the soap will disappear. Red rubber grease is impervious to water and glycol so will still be there as a lube when you come to remove the hose.
David Jones
S1 OTS OSB; S1 FHC ODB

Add your E-Type to our World Map: viewtopic.php?f=1&t=1810

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Topic author
peters3103
Posts: 145
Joined: Sun Aug 05, 2012 7:25 am
Location: Canberra Australia
Australia

#14 Re: Radiator hose kit

Post by peters3103 » Fri Feb 15, 2019 8:57 am

Bill Tracy Jaguar say they have the stockinette covered top hose available but haven’t responded as to how I can purchase it. There’s a company called Nufox Rubber in Manchester who can supply the same hose but they have a £150 min order so at £7.09 per hose I’d heed to buy a few. Another option is to have perhaps two or three full car sets of hoses made up which would presumably come to about the £150 mark.
November 61 flat floor FHC 885175
1999 XKR Coupe

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

abowie
Posts: 2101
Joined: Wed Sep 07, 2011 9:15 pm
Location: Australia
Contact:
Australia

#15 Re: Radiator hose kit

Post by abowie » Sun Feb 17, 2019 1:29 am

I've just opened my HK006 bought from Manners in July last year.

Currently these kits seem to be O/O/S; I think it's because they can't supply C12630 the L shaped bottom waterpump hose. The C12630 hose I got with my kit is too long by around 5cm on the long section of the L and is a quite loose fit on the C16999 connecting pipe. From memory the correct hose has different diameters on either end although I could be wrong. I think this is just a generic "near enough" hose they have sourced.

Supplied in the kit was C7848 which is the bypass hose on the left side of the engine. This is completely wrong being far too small in diameter to fit. As it's a pretty simple right angled hose I'll pop down to Repco; I'm sure that they can supply a hose to fit.

On a positive note the kit contains both the early ribbed and later smooth top hoses, depending on whether you have a 4lb or 9lb cap fitted.

Edit: the C7848 hoses also seem to be O/O/S on some sites, although XKs seem to have stock of both this and C12630 and also list Cooling Hose Kit - 09-4999 as in stock.
Andrew.
881824, 1E21538. 889457..oops
http://www.projectetype.com/index.php/the-blog.html
Adelaide, Australia

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply Previous topicNext topic