. There is not any reference on the Jaguar documentation. 
Hope someone can help.
Screw source
#1 Screw source
I'm looking for the screws closing the rear lignt and the covers side light . There is not any reference on the Jaguar documentation.
Hope someone can help.
. There is not any reference on the Jaguar documentation. Hope someone can help.
Le chemin sera long!...
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#2 Re: Screw source
Tadek
e-type S1 3.8 FHC - in restoration phase...
Jaguar XK120 OTS
Austin-Healey 100 BN2
e-type S1 3.8 FHC - in restoration phase...
Jaguar XK120 OTS
Austin-Healey 100 BN2
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#3 Re: Screw source
If you mean the front and rear lights on S2 and S3 cars the screws are 6-32 UNC x 1 inch long pan head. Not sure if they are Philips or Pozidriv.
Mike
S2 FHC
S2 FHC
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#4 Re: Screw source
The SCParts catalogue gives details for each screw - start here and drill down to individual screws. https://www.scparts.co.uk/sc_en/british ... board.html
Bob
'71 S3
'71 S3
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#5 Re: Screw source
Thank you all for your feedback. 
Le chemin sera long!...
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |