Talk about the E-Type Series 1
-
Topic author
JPowers
- Posts: 7
- Joined: Wed Mar 15, 2017 4:23 pm
Post
by JPowers » Tue Aug 15, 2017 6:28 pm
Hello All,
I'm a relatively new member to the forum. I've been doing a lot of lurking but this is my first post. I'm restoring a '66 4.2L FHC that my father and I purchased in 1979. It has been garaged basically since then and I'm going through all systems. I've removed the rear gearbox/engine mount (using the progressively lager bolt method suggested by someone on this forum... many thanks!) and found screwed to the base plate a tab about 3/4'' by 3.5'' with two rivets attached to it. What is a mystery is what was attached to those rivets. I can't find any mention in the shop manual or spare parts guide, nor on any image on the web. Can anyone help me out? I've attempted to attach a photo so hopefully it shows up.
Jim
66 FHC
-
abowie
- Posts: 3886
- Joined: Wed Sep 07, 2011 9:15 pm
- Location: Australia
-
Contact:
Post
by abowie » Tue Aug 15, 2017 10:22 pm
Not factory AFAIK.
-
1954Etype
- Moderator
- Posts: 2685
- Joined: Sat Sep 27, 2008 12:32 pm
-
Contact:
Post
by 1954Etype » Tue Aug 15, 2017 10:47 pm
It is the rear mounting for the forward heatshield that has become detached.
Angus 67 FHC 1E33656
61 OTS 875047
-
Topic author
JPowers
- Posts: 7
- Joined: Wed Mar 15, 2017 4:23 pm
Post
by JPowers » Wed Aug 16, 2017 7:02 pm
Thanks, really appreciate it guys. I'll add the heat shield to my growing list of missing parts!
Jim
Jim
66 FHC
-
Bill B
- Posts: 36
- Joined: Sun Apr 27, 2014 10:01 pm
- Location: US
Post
by Bill B » Sat Sep 02, 2017 10:09 pm
I have one on my 66, it is straight and horizontal yours appears to be bent a bit.
S1 OTS 4.2 1966
I really go to put this thing back together
