Pedal box fixing studs

Talk about the E-Type Series 1

Topic author
Robbiee
Posts: 692
Joined: Sun Aug 16, 2015 12:07 pm
Location: Derbyshire

#1 Pedal box fixing studs

Post by Robbiee » Sat Mar 10, 2018 8:49 am

Dear all
Can anyone tell me where to buy the UNC/ UNF studs that fit into the S1 pedal box?
Also I’m having trouble working out what stud is required for the air filter to fix to the support bracket? ie ..is it UNC/UNF or what
Thanks
Robbie
Robbie 1962 3.8 Coupe OSG 1962 OTS ODG

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

mgcjag
Moderator
Posts: 8092
Joined: Fri Jul 09, 2010 6:15 pm
Location: Ludlow Shropshire
Great Britain

#2 Re: Pedal box fixing studs

Post by mgcjag » Sat Mar 10, 2018 8:55 am

Hi Robbie....someone will come along soon that will give you an answer....but do you know about thread guages...cheapest sets a few pounds....a bit like feeler guages but with small saw teeth along the edge to match up with threads...well worth haveing.....as a general rule the end into aluminium it will be a course thread UNC & other end into steel a fine UNF..... all the best... Steve
Steve
69 S2 2+2 (just sold) ..Realm C type replica, 1960 xk150fhc

Link:
BBcode:
HTML:
Hide post links
Show post links


Topic author
Robbiee
Posts: 692
Joined: Sun Aug 16, 2015 12:07 pm
Location: Derbyshire

#3 Re: Pedal box fixing studs

Post by Robbiee » Sat Mar 10, 2018 9:23 am

Thanks Steve
The filter box is steel so probably UNC ...it more that it’s full of paint and I’m not sure which tap to use
Robbie
Robbie 1962 3.8 Coupe OSG 1962 OTS ODG

Link:
BBcode:
HTML:
Hide post links
Show post links


christopher storey
Posts: 5698
Joined: Sun Mar 09, 2008 3:07 pm
Location: cheshire , england
Great Britain

#4 Re: Pedal box fixing studs

Post by christopher storey » Sat Mar 10, 2018 10:30 am

Robbie - other way round - steel is almost always UNF , and UNC is used for studs that go into softer alloy. A lot of the Jaguar ones, such as for the inlet manifold , are mixed threads , being UNC at the cylinder head end and UNF for the nut end

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

kingzetts
Posts: 745
Joined: Thu May 15, 2008 9:33 am
Location: Worcester UK
Great Britain

#5 Re: Pedal box fixing studs

Post by kingzetts » Sat Mar 10, 2018 10:43 am

Hi Robbie,
For this sort of query, a good place to start is always the parts catalogues in the knowledge base.

For a 3.8 look in the brakes section and you will find “C18203” stud for brake pedal housing to scuttle. Then look on any of the usuals sites and you will find it eg Barratt’s says it supersedes to C2496* at £2.27. It is almost certainly as Steve says a 5/16 stud with one UNF and one UNC end.

For the filter housing look on the fuel system parts catalogue and find item 8 on plate 8 “C12705” stud securing air cleaner to support bracket. Again likely to be available cheaply from the usuals, and almost certainly in this case 5/16 UNF on both ends.
John '62 S1 OTS (now sold)

Link:
BBcode:
HTML:
Hide post links
Show post links


Topic author
Robbiee
Posts: 692
Joined: Sun Aug 16, 2015 12:07 pm
Location: Derbyshire

#6 Re: Pedal box fixing studs

Post by Robbiee » Sat Mar 10, 2018 2:17 pm

Thanks Gentlemen ..sorry slip of the thumb, I meant UNF
I will check out your collective advice
Robbie
Robbie 1962 3.8 Coupe OSG 1962 OTS ODG

Link:
BBcode:
HTML:
Hide post links
Show post links


288gto
Posts: 1417
Joined: Wed Nov 14, 2012 8:59 pm
Location: United Kingdom
Russia

#7 Re: Pedal box fixing studs

Post by 288gto » Sat Mar 10, 2018 2:36 pm

Once / now you know what they are, look for other cars like MG, Mini, Landrover etc that also use them and they will be a tenth the price of the same item for an E type. :lol:


Simon
Simon
1969 S2 OTS

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply Previous topicNext topic