Dealer Plaque

Talk about the E-Type Series 2
User avatar

Topic author
DazbodS2
Posts: 54
Joined: Fri Dec 11, 2015 7:04 pm
Location: Leicester
Great Britain

#1 Dealer Plaque

Post by DazbodS2 » Sat Feb 15, 2020 8:18 am

I have an original HR Owen metal plaque which I found loose in my S2 FHC. The Heritage Certificate confirms these were the original supplying dealer for my car so I would guess this was originally affixed to the car when first sold. The back of the plate suggests it was glued rather than riveted in place. The question is where would it have been located as I would like to reinstall it? It measures about 3”x4”. Any thoughts appreciated.
Darren - 1970 S2 FHC Signal Red.

Link:
BBcode:
HTML:
Hide post links
Show post links


Jeff Cecil
Posts: 40
Joined: Tue Sep 30, 2014 2:47 am
United States of America

#2 Re: Dealer Plaque

Post by Jeff Cecil » Sat Feb 15, 2020 4:36 pm

I have no idea where the plaque goes, but I can tell you a nice product to apply it with. U-Glu is what I used to put my Union Jacks on my car. It is removable without damage if you are careful, because it sticks like crazy. It is a sticky pad and not a runny glue.


Image

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Topic author
DazbodS2
Posts: 54
Joined: Fri Dec 11, 2015 7:04 pm
Location: Leicester
Great Britain

#3 Re: Dealer Plaque

Post by DazbodS2 » Sun Feb 23, 2020 10:38 pm

Appreciate the response Jeff thanks. The location still remains a mystery, I know on other cars Astons, Rolls etc, they riveted the plaque to the drivers side sill but I would doubt that’s where they went on E types.
Darren - 1970 S2 FHC Signal Red.

Link:
BBcode:
HTML:
Hide post links
Show post links


bitsobrits
Posts: 44
Joined: Tue Dec 27, 2011 2:09 am
Location: Iowa
United States of America

#4 Re: Dealer Plaque

Post by bitsobrits » Mon Feb 24, 2020 5:29 pm

I remove plaques with dental floss...
Steve
'65 S1 4.2 FHC

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply Previous topicNext topic