The 'E' Type Forum

Thanks very much guys. I'll have a look. Cheers Steve

Happy Easter all Has anyone got a photo of the correct routing for the wiring loom(s) on the left hand side under the dashboard in the footwell. I suspect someone has put a new loom in using the wrong holes. There are 2 bunches of wires , I presume one of these goes under the removable cover plate. ...

Thank you Trevor. Kind of you to reply. Regards Steve

I am restoring a series 2 fhc RHD. .
Can anyone please enlighten me regarding trim in the area of the steering column. Is there a shroud that covers the uj? If so does anyone have a photo or part number? Many thanks. Steve

Hi Steve. Thanks for the info. I'll check the link. I ordered rhd millboards cheers Steve

Help please. S2 FHC converted from lhd to rhd. Could any kind soul please take some photos of the panels, trim etc under the dashboard. Mine has nothing, it's all missing. I got a set of millboards from Barratts but they look nothing like the picture in their catalogue and the drivers side pair don'...

If it helps anyone this is how I replaced the hoses to the washer jets. Removed dash top and glove box Removed speedo and rev counter Detached hazard flasher unit bracket Using extra long nose pliers (11") attached hose to lh jet Moved wipers to other side by switching on ignition and stopping in pl...

Thanks Jamie

Thanks Andrew

I have a series 2 FHC which was purchased as a stalled restoration. I got the washer(s) working today except it would appear the lh jet is not connected as it dumped the water on the floor. I understand that it is a nightmare job. I have looked at various posts but they all vary and some may well re...

Yes they should but mine have been removed. Now I've found the wire they can be replaced.

Many thanks Mike. I'll have a look tomorrow

Hi . I have a series 2 FHC which has had the reversing lights removed and the holes for the wiring blanked off. Could anyone please tell me how the wiring to the rear for them is routed (left or right of the car) and what I have to remove in the boot to get to them (it). I want to see if the switch ...

Yep , that's confirmed it. Many thanks

Hi. Thanks for the link but unfortunately not. It can go in any one of six positions. The old one was smashed. Cheers

Could anyone please tell me the correct position for the plastic indicator cancelling ring. I assume the cancelling tit faces the centre of the switch with the steering straight ahead but I'm happy to be put right if it's not. Many thanks Steve

Has anyone in the UK found a source of 32mm paper/aluminium demister tubing other than SNG Barratt who are charging £30 for it? I don't want the plastic. Thanks

Thanks for your help Guys, much appreciated.

Hi
To save me a lot of head scratching can somebody please tell me where this fits? Ser2 fhc.

Unfortunately Steve that price is for painted.