This may be of interest…
https://www.gov.uk/government/calls-for ... r-evidence
Search found 478 matches
- Sat May 11, 2024 3:59 pm
- Forum: General
- Topic: Registering Historic Vehicles: Call for evidence
- Replies: 0
- Views: 111
- Tue Apr 23, 2024 5:02 pm
- Forum: Series 1
- Topic: Coolant Recomendations?
- Replies: 23
- Views: 3170
Re: Coolant Recomendations?
Hi Ian,
CarPlan Blue Star is exactly the same stuff. Try searching for that instead.
CarPlan Blue Star is exactly the same stuff. Try searching for that instead.
- Mon Apr 22, 2024 9:31 am
- Forum: Technical
- Topic: Voltage regulator problem??
- Replies: 7
- Views: 432
Re: Voltage regulator problem??
Obviously a bad connection somewhere, so firstly check all power connections around the battery. However, if the engine is also cutting out , you are losing ignition power. Could be the ignition switch failing, which is quite common. When it’s running, feel the key to see if it’s getting hot.
- Mon Apr 22, 2024 9:26 am
- Forum: Technical
- Topic: Considering a teardown of the IRS?
- Replies: 1
- Views: 168
Re: Considering a teardown of the IRS?
You could always undo the rear flexi hose and plug it. If the brake pedal issue is still present, it’s not the rears.
- Wed Apr 17, 2024 6:18 am
- Forum: Technical
- Topic: Timing? Carburation?
- Replies: 10
- Views: 618
Re: Timing? Carburation?
Definitely sounds like not enough advance. All the above advice is quite correct, but an easy test is to just manually advance the distributor (turn clockwise) to see if that improves the performance. If it does, then the distributor is not providing enough mechanical advance. You could leave it lik...
- Tue Apr 02, 2024 1:01 pm
- Forum: Welcome!
- Topic: Lazy Starting
- Replies: 38
- Views: 5216
Re: Lazy Starting
Hi Jerome,
I’ve just measured the lever gap on the S1 in my workshop with the choke fully on - 10mm. This is at B in your picture. Not quite the 5/8” as per the manual but this car starts perfectly from cold. Also, all three levers move this exact same amount.
I’ve just measured the lever gap on the S1 in my workshop with the choke fully on - 10mm. This is at B in your picture. Not quite the 5/8” as per the manual but this car starts perfectly from cold. Also, all three levers move this exact same amount.
- Tue Apr 02, 2024 7:09 am
- Forum: Welcome!
- Topic: Lazy Starting
- Replies: 38
- Views: 5216
Re: Lazy Starting
Hi Jerome,
From memory, each lever holding the mixture screw should be pushed up at least 5mm. I should be able to test and measure later today. Obviously, all three should be lifted by the same amount. If they don’t, you need to adjust the inter-connecting choke rods.
From memory, each lever holding the mixture screw should be pushed up at least 5mm. I should be able to test and measure later today. Obviously, all three should be lifted by the same amount. If they don’t, you need to adjust the inter-connecting choke rods.
- Mon Apr 01, 2024 6:35 pm
- Forum: Welcome!
- Topic: Lazy Starting
- Replies: 38
- Views: 5216
Re: Lazy Starting
I suppose it could also be an April Fool’s
- Mon Apr 01, 2024 3:48 pm
- Forum: Welcome!
- Topic: Lazy Starting
- Replies: 38
- Views: 5216
Re: Lazy Starting
Hi Jerome, The gaps at A and B have nothing to do with choke adjustment directly. The screw at B is the mixture adjustment and shouldn’t be touch (unless you need to adjust mixture!) The only real choke adjustment is the silver screw NEXT to C in your picture. It should be adjusted to be just clear ...
- Wed Mar 20, 2024 7:23 am
- Forum: General
- Topic: Christopher Storey
- Replies: 29
- Views: 2369
Re: Christopher Storey
So much knowledge and experience, he will be sorely missed.
- Sun Mar 17, 2024 3:23 pm
- Forum: Technical
- Topic: tach question (I have read old posts)
- Replies: 7
- Views: 391
Re: tach question (I have read old posts)
Yes, that is the tacho from the earlier S1 car that uses the AC generator on the back of the camshaft.
- Sun Mar 17, 2024 7:30 am
- Forum: Series 1
- Topic: Oil pressure, one more round
- Replies: 30
- Views: 1531
Re: Oil pressure, one more round
It’s probably just the calibration of your gauge or sender. The only real test is to temporarily attach a capillary gauge (mechanical) to show real pressure.
- Sat Mar 16, 2024 7:25 am
- Forum: Technical
- Topic: E-Type Fabs / Classic Fabs Exhaust System Price?
- Replies: 24
- Views: 2363
Re: E-Type Fabs / Classic Fabs Exhaust System Price?
Hi there (what’s your name?), I recently fitted a Jaguar Heritage exuast and it certainly wasn’t mis-aligned as yours. I reckon yours has been damaged in storage or shipping. Mine fitted perfectly. Whatever your decision, you definitely need to return yours and either get a replacment or refund. Go ...
- Sat Feb 24, 2024 8:33 am
- Forum: Series 1
- Topic: Moss box help
- Replies: 5
- Views: 654
Re: Moss box help
Hi Mike,
There are only three places oil can leak out the rear housing - the gasket, the speedo drive or the rear seal. Are you sure it’s not leaking from the top cover or selector rod and running down the sides?
There are only three places oil can leak out the rear housing - the gasket, the speedo drive or the rear seal. Are you sure it’s not leaking from the top cover or selector rod and running down the sides?
- Fri Feb 16, 2024 2:17 pm
- Forum: Series 1
- Topic: Center console, originality
- Replies: 24
- Views: 1923
Re: Center console, originality
Yes, I moved them to somewhere where they had a chance of working! Factory placement was indeed either side of the radio console as per your console.
- Fri Feb 16, 2024 8:19 am
- Forum: Series 1
- Topic: Center console, originality
- Replies: 24
- Views: 1923
- Fri Feb 16, 2024 8:14 am
- Forum: Series 1
- Topic: Center console, originality
- Replies: 24
- Views: 1923
Re: Center console, originality
Hi Mikael, Your tunnel cover should have a matching aluminium top cover and red vinyl sides. Similarly, the missing radio console should also have a matching front cover and red vinyl sides (where the speaker grills are, but are a total waste of time - but that’s a whole other conversation!). The ge...
- Wed Feb 07, 2024 7:09 am
- Forum: Technical
- Topic: 67 xke coupe 6 cylinder sender
- Replies: 4
- Views: 607
Re: 67 xke coupe 6 cylinder sender
Hi Mike, I photo might help to identify what you are seeing, however there shouldn’t be any other sender forward of the oil cleaner assembly. It sounds like a previous owner has fitted an additional sender into one of the oil gallery plugs along the side of the block. It may be for a low oil pressur...
- Tue Feb 06, 2024 8:15 am
- Forum: Technical
- Topic: xke quarter window FHC same as 2 +2 ????
- Replies: 2
- Views: 421
Re: xke quarter window FHC same as 2 +2 ????
It’s quite a different shape I’m afraid Mike.
- Tue Jan 16, 2024 8:15 am
- Forum: Welcome!
- Topic: Hello - SW UK
- Replies: 20
- Views: 4459
Re: Hello - SW UK
I’ve rebuilt all three models of the S1 over the years and have some good comparison photos of the shape differences between the FHC and 2+2. Apart from the rear hatch, all the glass in the 2+2 is different. The doors are about 9” longer and the body tub is larger. The bonnet is identical. The headr...