The 'E' Type Forum

According to Chuck Hadley at Monocoque Metalworks -- This is a pair of filler panels that mount between the inner bonnet valances (air ducts, inner fenders, etc.) and the flat headlamp diaphragm panel. These fill in a small approx. 2x4-inch space above the air tube where the valance meets with the h...

Hello, a typo -- well-spotted.
Correction: "The round clutch reservoir had a pressed steel cap with no markings."

Reference: JAGUAR E-Type Six-Cylinder Originality Guide, Haddock & Mueller, p-226, middle left photo. "The round clutch reservoir had a pressurized steel cap with no markings. There have been reports of E-types fitted with similar caps, but with GIRLING markings. The GIRLING caps were used on a rang...

According to "JAGUAR E-Type Six-Cylinder Originality Guide" by Haddock and Mueller, p-106: "The location of the body tags was initially on the firewall, above the brake and clutch reservoir mounting bracket on the upper right side of the firewall. The location was moved to the left bulkhead in the b...

SNG carries a Chrome Lens Joint Clip, product code 54571889. I used a few of these on my E-type several years back.

Here is what appears to have happened. The vendor of the 3/61 lube chart originally listed on Ebay with a starting bid of $450 read my Forum comment about the rarity of these early charts and my assessed value of $300--$500. He immediately cancelled is Ebay listing and relisted the same chart with a...

Here are three shots from my former national JCNA champion 885041, built 18 September 1961.

The 3/61 Lube Chart for the Series 1 E-type is quite rare. I've trolled Ebay for Jaguar parts as a hobby for many years and would guess I've see perhaps three (two as part of operating manuals). - I recall seeing only one 3/61 lube chart offered on Ebay in many years. I would not be surprised to see...

The tool roll itself is likely for a Series 2 (the Series 3 and the identical XJ6/XJS rolls were made of a thin unlined gloss black vinyl). - The 14" x 11" Series 2 roll featured nine main and two small pockets. Check the length and end markings on your box spanner -- - For most Series 2 E-types, th...

The link appears to still work.

Click on the link, then the word "here' in the following statement: "Click here to download your attachment."

Hello, Randall - I just checked with Roger Payne in Australia -- he's the world's expert on vintage classic tools and associated materials. One measurement in his articles on jack bags was missing. - He replied that the bottom of the bag is 7" wide, noting that corners are slightly curved where edgi...

Hello, The tool roll for the Jaguar E-type 1961-1968 measured: 21” x 10 3/4” w/top flap closed, 18” w/flap open, 12” strap, 14 lower pockets The jack container for the jack for the Jaguar E-type 1962-1970 measured: 27" long w/top flap open, 20" with flap closed, 11 1/2" wide top edge of open flap, (...

"The car (885026) needs to be as correct as possible (with some minor exceptions)." - Curved bulkheads and dished footwells are not "minor exceptions." Those features cannot be easily or cheapily reversed. IMHO, it would be a shame not to restore such an early car to its original configuration, no e...

Subject: Magnatex (Tex) 15 Quick-Release Oil Breather Clip According to the Internet, Bill Tracy passed away in 2019. Presumably his company, Bill Tracy Jaguar Auto Parts of Sarasota, Florida, has closed. - But -- several articles still appear on the Internet. Bill Tracy Auto 4050 Red Rock Lane Sara...

Hello - At one time I owned a JCNA National Champion 1961 E-type coupe. My surviving notes indicate my car was fitted with 4.5" RetroSound R-452 speakers. RetroSound R-452N speakers * 4.5" diameter * 1-1/3" mounting depth 4 Ohms 40 Watts RMS Power 80 Watts Max Power Cost: $60/speaker - - - - - - - -...

This article was already posted -- See #1 Factory Fit - Series 1 3.8.

The Haddock & Mueller lower photo caption in Item #6 points out that the Series 2+2 handles reverted back to the push button in handle configuration.

Reference: Jaguar E-Type Six Cylinder Originality Guide, Haddock & Mueller, P-272 The door handle with separate lock configuration appeared with introduction of the 2+2 during Series 1 production for model year 1966 and likely ran up to Series 2 production. See attached image from the Haddock & Muel...

Hello,

E-type toeboards occasionally appear on Ebay. For example:
https://www.ebay.com/itm/Jaguar-XKE-E-t ... Sw6ThgEJUa

Hello -

I do not have personal experience with Borranis but perhaps the best classic car restoration facility in the United States carries them -- you might find their information of some use:
http://classicjaguar.com/borrani-wire-wheels/