The 'E' Type Forum

Just rebuilt and reinstalled my slave cylinder. 1. After bleeding the system the plunger does not seem to stay depressed. 2. There seems to be no leak in the system. 3. New hydraulic fluid replaced. 4. Original lock-nut location on push rod maintained. Problem(s) 1. I have a lot of play in the push ...

Just want to thank everyone for their valuable input and guidance.

Compression test results are as follows:
1-130
2-145
3-135
4-140
5-135
6-135

Will report back oil pressure after oil chnage - 20W50.

First of all, I would like to thank all of you for your guidance. Tests 1. Compression test. 2. Test the oil pressure at the sending unit. (I did order a new one just in case pior to this posting) Notes: 1. The water in the header tank is very clean with no abnormailities. 2. Oil in sump is very cle...

1. At cold start oil pressure is about 40-50 psi. No problem. 2. At warm up the oil pressure begins to drop and sometimes fluctates to a point it reads zero on a drive. 3. Checked oil in sump, looks normal and is full. 4. Check the air cleaner and noticed that the breather pipe was full of white cre...