Search found 20 matches

by nzmike
Fri Mar 21, 2025 11:40 pm
Forum: Series 1
Topic: Ignition issues
Replies: 4
Views: 26916
New Zealand

Ignition issues

Hi all, since getting my S1 4.2 back on the road post engine rebuild I have been suffering from a misfire. It runs fine for around 50 miles then a misfire develops, and the only way of sorting it is a new set of spark plugs. I have a 123 ignition and am not sure if I have the correct plug/lead/coil ...
by nzmike
Mon Dec 09, 2024 5:34 am
Forum: Series 1
Topic: Spark plugs
Replies: 3
Views: 37978
New Zealand

Spark plugs

Hi all, my S1 4.2 has just had a full engine rebuild. As part of the rebuild, we fitted fast road cams and upped the compression ratio to 9.6:1. Would be interested to hear from other owners with modified engines as to which spark plugs you have fitted. We have set the carbs carefully but we are fin...
by nzmike
Sun Sep 01, 2024 4:53 am
Forum: Series 1
Topic: Turn Signal Repeaters
Replies: 4
Views: 2782
New Zealand

Turn Signal Repeaters

Hi all, the turn signal repeaters on the dash of my E Type have stopped working. I have used a test lamp and they are getting power, but it looks like they are not earthing properly. Is anyone aware of where the earth is for these? I cannot track it via the wiring diagram.
by nzmike
Fri Nov 10, 2023 12:18 am
Forum: Series 1
Topic: S1 4.2 seats
Replies: 3
Views: 2937
New Zealand

S1 4.2 seats

Hi all, can anyone advise if the seats on the S1 4.2 can be reclined any further through adjustment, or are they fixed? I couldn't see anything on the outside that would allow adjustment. Additionally, has anyone tried to lower the seats in any way to obtain more headroom in an FHC? Many thanks.
by nzmike
Fri Jul 28, 2023 7:39 pm
Forum: Series 1
Topic: Radio Console - S1 4.2
Replies: 2
Views: 2967
New Zealand

Re: Radio Console - S1 4.2

Many thanks for your reply Tim.
by nzmike
Fri Jul 28, 2023 6:56 am
Forum: Series 1
Topic: Radio Console - S1 4.2
Replies: 2
Views: 2967
New Zealand

Radio Console - S1 4.2

Hi all, I am have purchased a new frame for the radio console on my S1 4.2, as a prior owner had installed a homemade item. A couple of queries I would appreciate some advice on: - how does the metal faceplate attach to the frame? It has four pins (photo below) which engage into four holes in the fr...
by nzmike
Sat Feb 04, 2023 10:35 pm
Forum: Series 1
Topic: Temperature
Replies: 5
Views: 3022
New Zealand

Temperature

Hi all, my S1 4.2 is back on the road after an engine rebuild. It has an 82 degree thermostat and an after market electric fan. Where does the temp guage tend to sit in normal running? Mine is sitting just below the 90 degree mark, is this normal? I have a standard radiator, water pump etc. I am awa...
by nzmike
Tue Jan 24, 2023 4:01 am
Forum: Series 1
Topic: Exhaust system
Replies: 11
Views: 7698
New Zealand

Exhaust system

Hi all, my S1 4.2 has just come out of an engine rebuild and now has lightly modified heads and fast road cams. The Jaguar specialist who rebuilt the motor advised me that I have non standard front mufflers which are very restrictive, and suggested changing these. Has anyone fitted a big bore exhaus...
by nzmike
Fri Jun 25, 2021 8:47 pm
Forum: Series 1
Topic: Instrument rims
Replies: 9
Views: 4881
New Zealand

Re: Instrument rims

Thanks everyone for the replies - I'll try rubbing them down and repainting before I look at new ones.
by nzmike
Fri Jun 18, 2021 11:49 pm
Forum: Series 1
Topic: Instrument rims
Replies: 9
Views: 4881
New Zealand

Instrument rims

Hi all, the black rims on the instruments of my S1 4.2 are in poor shape, with bubbling paint and pitting. The instruments themselves are all in good shape. Does anyone know if it possible to purchase new rims? I have looked on line but could not locate anything. Many thanks.
by nzmike
Wed Dec 02, 2020 12:20 am
Forum: Series 1
Topic: Nearly there
Replies: 14
Views: 8870
New Zealand

Re: Nearly there

Looks great. I have the same colour E Type a few steps behind you! This started off as a tune up to solve a misfire...which revealed a valve problem...once the head was off everything else looked tired so it was an engine rebuild....followed by an engine bay repaint and front suspension refresh. The...
by nzmike
Wed Oct 07, 2020 10:38 pm
Forum: Series 1
Topic: Anti Roll Bar
Replies: 1
Views: 1622
New Zealand

Anti Roll Bar

Hi all, with the engine rebuild on my S1 4.2 FHC coming together I am looking over the front suspension while the engine is out. The front anti roll bar has been hit at some time and is bent. Would anyone recommend fitting an uprated bar - and if so, what size would be suggested? It is for a road ca...
by nzmike
Sun Jul 12, 2020 8:14 am
Forum: Series 1
Topic: Engine Rebuild 4.2
Replies: 7
Views: 3923
New Zealand

Re: Engine Rebuild 4.2

Many thanks for the detailed response Andrew, much appreciated.
by nzmike
Sat Jul 11, 2020 11:14 pm
Forum: Series 1
Topic: Engine Rebuild 4.2
Replies: 7
Views: 3923
New Zealand

Engine Rebuild 4.2

Hi all, I am about to embark on an engine rebuild on my S1 4.2. Are there any recommended mods or upgrades that I should consider when doing the rebuild? Many thanks.
by nzmike
Fri Dec 27, 2019 7:11 am
Forum: Series 1
Topic: Engine Temperatures
Replies: 3
Views: 2723
New Zealand

Engine Temperatures

Hi all, I am working through my recently acquired S1 4.2 and am interested to know what thermostats are typically fitted to S1's, and what temps the engine fans are set to come on. My car appears to have an 82 degree thermostat with the fan set to cut in at 90 - is this normal? (its an aftermarket f...
by nzmike
Sun Oct 13, 2019 7:31 pm
Forum: Welcome!
Topic: Hello from New Zealand
Replies: 6
Views: 7534
New Zealand

Re: Hello from New Zealand

rswaffie wrote:
Tue Oct 01, 2019 7:55 am
Welcome. You will find this forum invaluable as you get your fabulous S1 back on the road. Keep the pics & updates coming.
What trim colour?
It’s an incontrovertible fact that Opalescent Golden Sand is the best colour for an E-Type. :dance:
Hi, the trim colour is tan.
by nzmike
Fri Oct 04, 2019 12:02 am
Forum: Welcome!
Topic: Hello from New Zealand
Replies: 6
Views: 7534
New Zealand

Re: Hello from New Zealand

malcolm wrote:
Tue Oct 01, 2019 8:21 am
Hi, and welcome to the forum. Where in NZ are you?
Hi, I am in Auckland
by nzmike
Wed Oct 02, 2019 6:50 am
Forum: Series 1
Topic: Steering Wheel
Replies: 10
Views: 8848
New Zealand

Re: Steering Wheel

Thanks Andrew - I had no idea the wheel had any adjustment at all - but by moving it toward me that had made a big difference. I'll stick with the standard wheel for now and see how it goes.

Thanks all for your help!
by nzmike
Tue Oct 01, 2019 7:10 am
Forum: Welcome!
Topic: Hello from New Zealand
Replies: 6
Views: 7534
New Zealand

Hello from New Zealand

Hello all, I have just purchased my first E Type, an S1 4.2 FHC in Golden Sand, here in New Zealand. It have just returned from a 2000km round trip to trailer it home - its in good order but has done minimal mileage in recent years so a trailer was the safe bet. Looking forward to learning more from...
by nzmike
Tue Oct 01, 2019 6:56 am
Forum: Series 1
Topic: Steering Wheel
Replies: 10
Views: 8848
New Zealand

Steering Wheel

Hi all, I have just bought my first E Type, an S1 4.2 FHC. Its original steering wheel is in poor shape and in need of refurbishment. I am quite tall and find it hits my legs. I note that Mota Lita do an E Type wood rim wheel in 14, 15 and 16 inch. 14 inch is appealing as it would make it easier for...