Hi, does anyone know what the circular hole next to the heater hole is in the bulkhead of my RHD Series1 2+2 ?
It is covered by a square plate with a pop rivet in each corner. The fifth hole is for one of the heater box mountings and has the captive nut on the inside.
Photo attached.
Steve
Circular hole in Bulkhead
-
Stevejaguar
Topic author - Posts: 176
- Joined: Mon Jul 18, 2016 10:55 am
-
Stevejaguar
Topic author - Posts: 176
- Joined: Mon Jul 18, 2016 10:55 am
#2 Re: Circular hole in Bulkhead
- Attachments
-
- IMG_20210405_134218_resized_20210405_041332584.jpg (57.32 KiB) Viewed 2136 times
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#3 Re: Circular hole in Bulkhead
Hi
Possibly for the steering column on a lhd build? Or, as on my 3.8, for the brake bellows assembly.
Possibly for the steering column on a lhd build? Or, as on my 3.8, for the brake bellows assembly.
Richard
Previous owner and restorer of a S1 3.8 FHC Opalescent Golden Sand with Tan Trim 889504 (now sold and headed for Athens)
Previous owner and restorer of a S1 3.8 FHC Opalescent Golden Sand with Tan Trim 889504 (now sold and headed for Athens)
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |