E type headrests
#1 E type headrests
What is required to fit headrests in a seat that does not have them, I have a set of headrests here and the bezel, is there a bracket inside the regular seat to accept the headrest under the leather?
Yo Yo that car is straight blazing
Jaguar E-Type S2 2+2 (69)
Replica AC Cobra 427 6.3Ltr V8 450BHP
Jaguar E-Type S2 2+2 (69)
Replica AC Cobra 427 6.3Ltr V8 450BHP
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#2
Hi,
If you have blanks in the trim for the headrests, then you should have brackets in the seats to accept the headrests, if not then you will have to take the trim off the seats and do some modifications to the frame; do-able, but not simple and you should be confident in the person doing the welding.
Blanks will be obvious - normally chrome finished with plastic blanks clip into the chrome trim, which may of course be missing. You don't mention which Series you have, but earlier cars are less likely to have them than later ones.
Best of luck
Regards,
If you have blanks in the trim for the headrests, then you should have brackets in the seats to accept the headrests, if not then you will have to take the trim off the seats and do some modifications to the frame; do-able, but not simple and you should be confident in the person doing the welding.
Blanks will be obvious - normally chrome finished with plastic blanks clip into the chrome trim, which may of course be missing. You don't mention which Series you have, but earlier cars are less likely to have them than later ones.
Best of luck
Regards,
Regards,
Simon
Series III FHC
Simon
Series III FHC
Link: | |
BBcode: | |
HTML: | |
Hide post links |