Page 1 of 2

#1 Anyone live in the Austin, Texas area with an hour to spare?

Posted: Fri Feb 26, 2016 5:25 pm
by Bob.
I am looking seriously at buying the S3 2+2 I highlighted in another thread from CJ Classics in Austin, Texas and although everything seems to stack up OK and they have a good reputation, it would be helpfull if someone could actually lay eyes on the car for me. Is there anyone in the area with a spare hour or so? Danger is from what I see on their website you might buy something for your car if you go there! (BTW I have spoken to Harry Fulford)

#2

Posted: Wed Mar 16, 2016 9:08 pm
by Herbicide
Did you buy it in the end I see it's now sold it looked like a good buy to me?

#3

Posted: Fri Mar 18, 2016 10:06 pm
by Bob.
Well having had rules of never buying a car I hadn't driven let alone one I haven't seen, I decided that rules are for fools and for the guidance of wise men, so after having had a lot more photos taken and seeing detailed receipts for over $80,000 worth of work done over the last 8 years by Classic Jaguar I have indeed broken my rules and bought it. Only time will tell if I am a wise man or not. :)

Image

It was picked up and transported to Houston early this week and put on its own into a 20' container yesterday. I hope those restraints are better than they look!
Image

Now waiting for the good ship Nansen Straight to arrive at Houston next Wednesday (it's currently heading for Veracruz at 14kt) and then after stops at New Orleans and Charleston ETA Southampton is 10 April.

Image

#4

Posted: Sat Mar 19, 2016 7:58 am
by christopher storey
Well done ! Good luck with it

#5

Posted: Sat Mar 19, 2016 9:49 am
by Bob.
Thanks Christopher.

#6

Posted: Sat Mar 19, 2016 10:55 am
by 1954Etype
Looks great! CJ have a good reputation and if you go onto their website you might find photographic record of the work they have done.

#7

Posted: Sat Mar 19, 2016 11:26 am
by nefematic
Congralutations to your purchase! Have fun and enjoy. I like the shipping in a dedicated container.
Martin

#8

Posted: Sat Mar 19, 2016 11:37 am
by vr6-er
Somehow I think your are going to be over the moon when it arrives.

Rik.

#9

Posted: Mon Mar 21, 2016 4:49 pm
by Bob.
Thanks all.
1954Etype wrote:Looks great! CJ have a good reputation and if you go onto their website you might find photographic record of the work they have done.
CJ certainly do have an excellent pictorial blog detailing much of their restoration work. Before I bought the car I found pictures taken during fitting the new Suffolk & Turley interior and some of the earlier repainting.
nefematic wrote:I like the shipping in a dedicated container
I decided to pay double the shipping cost for a dedicated 20' container rather than the more usual 40' which have 2 cars on a single level or 4 cars in a double deck arrangement.This was after hearing tales of cars being climbed over when lashings are being fixed and in the case of double deckers of top level cars leaking oil, coolant or dirt onto the cars below. For shared containers there was also the issue that your car may have to wait longer in a warehouse or on the dockside whilst other cars turn up to fill a large container. Mine arrived at the port, spent one day in a warehouse with other cars and was in its container the next day so it limited the time it was vulnerable to damage and theft of parts - longer time being hot in a container though!

#10

Posted: Sun Mar 27, 2016 12:17 pm
by Bob.
Well the ship left Houston on Friday - hopefully with my car aboard - and after heading out into the Gulf of Mexico it has now wound its way up the Mississippi and is docked in New Orleans. Due to leave today then next stop Charleston on Wednesday.

Image

Wondering which rustproofing system (Dinitrol, Waxoyl, any others?) to use and who to trust to do it given that a new interior was recently fitted to the car. I used Waxoyl myself back in a 1990's summer and remember it being quite a messy job. There is a firm called Ultimate who offer both treatments - has anyone used them?

#11

Posted: Fri Apr 01, 2016 7:18 pm
by Bob.
Only another 3000 and a bit miles to go.

Image

Unfortunately the ship is only fitted with the small block engine so it will take a while.

Image

#12

Posted: Fri Apr 01, 2016 7:34 pm
by mgcjag
Hi Bob.....and it looks like a straight 6...... is it an XK 4200000000000000 :lol:

#13

Posted: Fri Apr 01, 2016 7:35 pm
by Alty Ian
Bet that doesnt have a rope seal :roll: :lol:

#14

Posted: Fri Apr 01, 2016 9:17 pm
by Mich7920
I have a question :
the tires, 185 or 205 ??

#15

Posted: Fri Apr 01, 2016 9:42 pm
by Bob.
Don't know but I think the main bearings look oversize

Image

#16

Posted: Fri Apr 01, 2016 9:48 pm
by Bob.
and setting the timing chain tension looks like a challenge.

Image

#17

Posted: Fri Apr 01, 2016 10:10 pm
by Mark Gordon
Did they use a Rolon timing chain tensioner?

#18

Posted: Sat Apr 02, 2016 11:51 am
by PeterCrespin
Mark Gordon wrote:Did they use a Rolon timing chain tensioner?
If it's a cargo ship it would be Rolon/Roll-off

#19

Posted: Wed Apr 06, 2016 9:26 am
by Bob.
Looking at the speed graph I think it must be Rolling about as they have added 30 hours to the ETA.

Image

#20

Posted: Sat Apr 09, 2016 8:30 pm
by Bob.
Ship has just joined the M25 of the shipping world, just as the weather is worsening, so fingers crossed.

Image