#1 FHC Waxing Chart Request
Posted: Tue Mar 07, 2017 8:36 am
I feel guilty I haven't ever coated my inner box sections on my S2 FHC. It has no rust and has never been restored being a West coast car originally.
When I did the RHD conversion and replaced the heater pipes I got a good look inside the bulkhead void. I is in lovely condition with the original primer, spurge of silver top coat where the seams meet. I want to try and keep it all that way!
I want to get right in there and also the sills/wheel arched/chassis legs/boot floor/tailgate structure with rust proofing wax before the terror gets hold.
Anyone got a pdf waxing chart?, or an article on rustproofing please?
I am looking for the existing injection points for the probe and the correct points to drill.
I know the hole for the sills has to be drilled in just the right spot otherwise the probe will encounter obstructions.
I have already done my door bottoms, being careful not to fill the drain holes!
I have all the gear to spray at whatever psi.
Any one know about this please?
When I did the RHD conversion and replaced the heater pipes I got a good look inside the bulkhead void. I is in lovely condition with the original primer, spurge of silver top coat where the seams meet. I want to try and keep it all that way!
I want to get right in there and also the sills/wheel arched/chassis legs/boot floor/tailgate structure with rust proofing wax before the terror gets hold.
Anyone got a pdf waxing chart?, or an article on rustproofing please?
I am looking for the existing injection points for the probe and the correct points to drill.
I know the hole for the sills has to be drilled in just the right spot otherwise the probe will encounter obstructions.
I have already done my door bottoms, being careful not to fill the drain holes!
I have all the gear to spray at whatever psi.
Any one know about this please?