S1 How to tighten ignition switch bezel

[eddiecross]

Hi,
S1 Ignition switch is in the centre gauge panel and is loose but the bezel nut is jammed. Is there a special spanner t remove and tighten? Tried a few sites but couldn't see anything. I'm sure Frosts used to stock them

Thx
Eddie

[abowie]

Yes there is a special tool. The usuals sell them.

[Series1 Stu]

I made one. This is it




I used 2mm thick aluminium and filed a chamfer on it. It won't damage the chrome but you can always re-file the ends if they burr up.

Regards

[gts2]

I use this one:

[eddiecross]

Thanks guys,
If anyone can forward a link to a site that sells them that would be great as had no luck with my Googling.

Thx
Eddie

[mark10337]

Moss Europe sell them
https://www.moss-europe.co.uk/ although I couldn't find it on their website.

but from the same company on eBay

https://www.ebay.co.uk/itm/CLASSIC-CAR- ... 2387913618

[eddiecross]

£25 Ouch!
Looks like I'm fabricating one. Thx

Eddie

[dal2.0litrefrogeye]

Got mine from Baratts(the socket snapped tool ) a few years back ...... they wernt 25 quid then