Black coated hubs
-
mgcjag
Topic author - Moderator
- Posts: 9211
- Joined: Fri Jul 09, 2010 6:15 pm
- Location: Ludlow Shropshire
#1 Black coated hubs
Hi All....posted this on Jaglovers whilst this forum was down.....black coated splined hubs are an option from some of the usual suppliers....has anyone had them and fitted bearings into them....did the very thin black coating have to be removed or did the bearings fit in ok.....just waiting on a bearing insert tool to arrive before i start fitting..Steve
Steve
69 S2 2+2 (sold) ..Realm C type replica, 1960 xk150fhc
69 S2 2+2 (sold) ..Realm C type replica, 1960 xk150fhc
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#2 Re: Black coated hubs
I bought them Steve and the bearings went in fine.
Jeremy
1967 S1 4.2 FHC
1967 S1 4.2 FHC
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
-
mgcjag
Topic author - Moderator
- Posts: 9211
- Joined: Fri Jul 09, 2010 6:15 pm
- Location: Ludlow Shropshire
#3 Re: Black coated hubs
Thats good to know Jeremy.....thanks... Steve
Steve
69 S2 2+2 (sold) ..Realm C type replica, 1960 xk150fhc
69 S2 2+2 (sold) ..Realm C type replica, 1960 xk150fhc
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#4 Re: Black coated hubs
Ditto, got mine from SNGB and no problems.
Richard
Previous owner and restorer of a S1 3.8 FHC Opalescent Golden Sand with Tan Trim 889504 (now sold and headed for Athens)
Previous owner and restorer of a S1 3.8 FHC Opalescent Golden Sand with Tan Trim 889504 (now sold and headed for Athens)
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |