Page 1 of 1
#1 Triple 4.2 SU inlet Manifold
Posted: Thu Jun 21, 2018 7:59 pm
by Julian.P
Managed to aquire a 4.2 inlet manifold, needs a little TLC, threads in the casting for water, vacuum outlets and temperature gauge switch need cleaning with a tap running through them, anyone know what thread sizes these are?
Many thanks in advance,
https://i.imgur.com/YFvdGt9.jpg
https://i.imgur.com/C6GUboZ.jpg
#2 Re: Triple 4.2 SU inlet Manifold
Posted: Thu Jun 21, 2018 8:53 pm
by tim wood
Had mine helicoiled . 5/8 BSP from memory.
Tim
#3 Re: Triple 4.2 SU inlet Manifold
Posted: Thu Jun 21, 2018 8:59 pm
by Julian.P
Hi Tim thanks for your reply, would that be for water & vacuum outlets?
#4 Re: Triple 4.2 SU inlet Manifold
Posted: Thu Jun 21, 2018 9:18 pm
by tim wood
I only had the water outlet done. Sorry should have mentioned that .
#5 Re: Triple 4.2 SU inlet Manifold
Posted: Thu Jun 21, 2018 9:24 pm
by Julian.P
Hi Tim many thanks it’s the water outlet on mine as well...
#6 Re: Triple 4.2 SU inlet Manifold
Posted: Mon Jun 25, 2018 6:41 pm
by Julian.P
I would just like to confirm thread sizes for the above, Heater and Vacume Outlets 3/8 BSPP, Temperature Gauge Sender 1/2 UNF, hope this be useful for someone in the future.
Julian.
