accelerator control rod length
#1 accelerator control rod length
Hi all, looking to re-use my accelerator control rods from previous LHD to current RHD conversion on my 68 2+2. Would be much appreciated if someone could provide the length measurement from a RHD of 1 - control rod b/w pedal lever and outer fulcrum [ p/n c17867 ] and 2- control rod linking fulcrum levers [ p/n's C17868 & C30932 for 2+2, different part no's but same length rod as mentioned on here previously ]. TIA, Paul J
Paul
68 1.5 2+2 Lhd-Rhd full resto
68 1.5 2+2 Lhd-Rhd full resto
Link: | |
BBcode: | |
HTML: | |
Hide post links |
-
- Posts: 159
- Joined: Mon Jul 18, 2016 10:55 am
#2 Re: accelerator control rod length
Hi Paul
On my 66 2+2 C17867 ( vertical one) is 5,3/4 inches long and C17868 ( horizontal one ) is 10,1/2 inches long. These are overall dimensions not joint to joint.
Hope this helps
Steve
On my 66 2+2 C17867 ( vertical one) is 5,3/4 inches long and C17868 ( horizontal one ) is 10,1/2 inches long. These are overall dimensions not joint to joint.
Hope this helps
Steve
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#3 Re: accelerator control rod length
Hi Steve, overall is perfect, many thanks, Paul
Paul
68 1.5 2+2 Lhd-Rhd full resto
68 1.5 2+2 Lhd-Rhd full resto
Link: | |
BBcode: | |
HTML: | |
Hide post links |