Series 1 2+2.
Hi does anyone have a photo of the trim that covers the wiring on the LHS bulkhead fitted please?
Part number BD 29152.
The parts book says its fitted with 3 bifurcated rivets but there is no way my cover is going to line up with any holes in the bulkhead ( I can only find 2 ).
Does it clip to the bulkhead or the A post trim panel ?
Steve
Under dash trim covering wiring.
-
Topic author - Posts: 159
- Joined: Mon Jul 18, 2016 10:55 am
-
Topic author - Posts: 159
- Joined: Mon Jul 18, 2016 10:55 am
#2 Re: Under dash trim covering wiring.
Hi, anyone have photos of how this wiring is held in place ?
Steve
Steve
- Attachments
-
- IMG_20210625_200526.jpg (30.63 KiB) Viewed 1090 times
-
- IMG_20210625_200013.jpg (24.69 KiB) Viewed 1090 times
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#3 Re: Under dash trim covering wiring.
I never got mine to line up with any of the holes.
Simply drilled new ones and secured it with trim screws with cups. Secured to the left hand panel. The cover was trimmed to match the footwell trim and the screws were not visible once the footwell panel was in place.
Tim
Simply drilled new ones and secured it with trim screws with cups. Secured to the left hand panel. The cover was trimmed to match the footwell trim and the screws were not visible once the footwell panel was in place.
Tim
Series 1 FHC purchased 40 years ago. Courted my wife in it.
Series 1 2+2 when the kids were small now sold.
Series 1.5 OTS in opalescent maroon, Californian car. My retirement present.
Series 1 2+2 when the kids were small now sold.
Series 1.5 OTS in opalescent maroon, Californian car. My retirement present.
Link: | |
BBcode: | |
HTML: | |
Hide post links |